Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL

RH-Cyclotron, all entries  Not logged in

Back |  Find |  Select |  Help |  Login

Full | Summary | Threaded     193 Entries

Goto page 1, 2, 3 ... 8, 9, 10

ID Date Author Category Type Subject Text   5   Tuesday, September 25, 2012, 08:57 maicodallavalle Elevation Jack Maintenance 2012 Service Maintance of #4 Station Jacking System Shut down work for 2012.Replaced serviced Jacking Station #6. Tapered alignment pins were damaged. They were skimmed and checked      6   Thursday, October 25, 2012, 13:58 maicodallavalle Service Bridge Maintenance Orbit Drive It was observed during the last time the Cyclotron service bridge was used the orbit drive chain had a lot of slack. The drive      13   Wednesday, February 13, 2013, 08:55 maicodallavalle Service Bridge Repair Service Bridge/Carrier Hydraulic Jacks On Monday February 4TH  the Service Bridge was being lifted into  the Cyclotron with the Carrier. It was noticed that one      25   Thursday, January 16, 2014, 08:46 maicodallavalle Trolleys serviced Maintenance Pre Cyclotron work servicing and checking This is a list of all the trolleys and other equipment witch were checked and serviced prior to work in the Cyclotron.      47   Friday, January 23, 2015, 10:27 maicodallavalle Elevation Jack Maintenance 2015 Jack Maintenance - Stations #4 and Station #9 The Cyclotron Elevating System Shut Down  work done this year was done on Station #4 and Station #9.      48   Monday, January 26, 2015, 07:57 maicodallavalle Elevation Jack Maintenance Fall arrest Platform Railing All of the Fall arrest Platform Railing has been Collapsed for Cyclotron Lid up.      62   Tuesday, March 17, 2015, 13:04 maicodallavalle Cyclotron Maintenance Upper Bearings Station #5 and #10 The Upper bearings on Station #5 and Station #10 have been serviced. The Upper Bearing were disassembled. The old gear was removed      63   Thursday, March 19, 2015, 13:14 maicodallavalle Shielding Standard Operation Remote Handling B2 level Shielding door The Remote Handling B2 level Shielding door has been closed.      73   Tuesday, October 27, 2015, 07:50 maicodallavalle Elevation Jack Standard Operation Service to Station # 9 Right side  Station #9 Cleaning of  discoloration- The right side Jack screw nut and worm screw (mating parts in the right side  9x    76   Wednesday, January 27, 2016, 10:51 maicodallavalle Elevation Jack Maintenance 2016 Cyclotron Elevation System Maintenance The Cyclotron Elevating System Shut Down  work done this year was done on Station #9 and Station #10.      109   Monday, February 19, 2018, 12:58 maicodallavalle Trolley Repair Lift Trolley Repair We had just finished pulling out the ladders from the cyclotron with the lift trolley. We started to run the lift trolley into the      149   Thursday, February 02, 2023, 07:05 maicodallavalle Service Bridge Repair Hinged Festoon Rail at Cyclotron The Hinged section of the festoon rail at Cyclotron has a piston to keep rail in the up position for shutdown work (Bridge      60   Monday, March 09, 2015, 11:55 chad fisher Elevation Jack Maintenance Checking for contamination on fall arrest equip. Fall equipment from the lockers in the RH shop have been checked for contamination and the lockers themselves have been swiped.      61   Tuesday, March 10, 2015, 10:24 chad fisher Elevation Jack Maintenance Contaminated equipment update The harness, carabineer, and shock packed used during the ISAC hot cell swipe have been checked seperately by Mike and he has      14   Wednesday, February 27, 2013, 12:08 Travis Cave Cyclotron Standard Operation Installation of 2C 2C has been installed located on all QDLs and all the numbers, continuity check done and passed. Bridge has been removed from      15   Tuesday, March 05, 2013, 14:11 Travis Cave Cyclotron Standard Operation Setup and the Installation of the HE 1 probe. Setup of the HE 1 probe is difficult has we have no mockup of it to properly setup cameras and equipment for it. This is problem      24   Monday, September 30, 2013, 14:02 Travis Cave Service Bridge Maintenance new festooning The festooning and bearings for the festooning cars for both outriggers has been replaced and it is in working order.      26   Friday, January 17, 2014, 07:53 Travis Cave Trolleys serviced Standard Operation Trolley checks All trolleys work electrically and control wise. One encoder was found non functioning on the upper resonator trolley for the vertical      29   Friday, January 24, 2014, 14:10 Travis Cave Cyclotron Standard Operation Copper blockers The copper blockers have been removed from the cyclotron and placed into the coffins.      30   Monday, January 27, 2014, 14:42 Travis Cave Shielding Standard Operation shields and radiation survey The cyclotron radiation survey was aborted due to the orbit not working recording the numbers correctly. One shield has been in      31   Tuesday, January 28, 2014, 14:59 Travis Cave Shielding Standard Operation shields 200's, 400's, 500's, 600's, and a pallet of 700's have been installed      33   Thursday, January 30, 2014, 13:47 Travis Cave Cyclotron Standard Operation shields All shields, pothole covers, and ladders have been installed into the cyclotron.      34   Friday, January 31, 2014, 10:07 Travis Cave Cyclotron Standard Operation 2C removal 2C has been successfully removed from the cyclotron and is now currently sitting in the B2 level of the RH building. A tank access      35   Friday, February 07, 2014, 10:50 Travis Cave Cyclotron Standard Operation 2C install 2C has been installed into the cyclotron.      38   Tuesday, February 25, 2014, 15:00 Travis Cave Shielding Standard Operation shields Started on the removal of shields.      39   Wednesday, February 26, 2014, 14:55 Travis Cave Shielding Standard Operation shields More shields have been removed from the cyclotron only 16 remain. I was also noted that the lift trolley is making an odd noise      40   Monday, March 03, 2014, 13:09 Travis Cave Cyclotron Standard Operation shields all shields, porthole covers and ladder out and copper blockers in. Some conmination was found on the pads of the ladders (about      42   Tuesday, April 08, 2014, 10:45 Travis Cave Shielding Standard Operation Large shield door on the RH B2 level The large shield door on the RH B2 level of the remote handling building has been shut.      50   Tuesday, January 27, 2015, 14:40 Travis Cave Cyclotron Standard Operation Day one of in tank work Day one of RH in tank work for the cyclotron (shields and blockers stuff like that) many pictures were taken.      51   Wednesday, January 28, 2015, 14:33 Travis Cave Cyclotron Standard Operation Day two of in tank work All copper blocker removed from the cyclotron and first radiation survey done. Shields start tomorrow.      52   Thursday, January 29, 2015, 14:53 Travis Cave Cyclotron Standard Operation Day three of in tank work Over 50% of the shields are in some 700's left and the monitor box covers.      53   Friday, January 30, 2015, 15:02 Travis Cave Cyclotron Standard Operation Day four of in tank work All shields, ladders and pothole covers are in. One rad survey left to do.      54   Monday, February 02, 2015, 14:28 Travis Cave Cyclotron Standard Operation Day five of in tank work Final Radiation Survey done. All in tank work completed bridge removed from the tank.      55   Wednesday, February 04, 2015, 13:57 Travis Cave Cyclotron Standard Operation 2C removal 2C has been removed from the cyclotron.      57   Tuesday, February 17, 2015, 11:28 Travis Cave Cyclotron Standard Operation 2C Installation 2C extraction probe has been re-installed in the cyclotron. After some problems on the first install attempt, do to a busted      58   Friday, March 06, 2015, 14:38 Travis Cave Cyclotron Standard Operation Shield Removal All shields and ladders have been removed from the tank, all the port holes have been uncovered, the tank seal has been vacuumed,      66   Friday, March 27, 2015, 11:25 Travis Cave Cyclotron Standard Operation Copper Blockers Copper Blockers have been removed from the cyclotron and one ladder has been installed.      74   Tuesday, January 05, 2016, 09:58 Travis Cave Cyclotron Standard Operation Opened the shield door The shield door on the B2 level has been opened.      78   Friday, February 05, 2016, 14:55 Travis Cave Shielding Standard Operation shadow shields all 200, 400, 500, 600, and some 700 series of shield are in.      79   Friday, February 05, 2016, 14:57 Travis Cave Service Bridge Maintenance outrigger problem outrigger 1 had a power failure, bridge was removed power restored and outrigger parked, outrigger will be looked at once      80   Tuesday, February 09, 2016, 14:48 Travis Cave Cyclotron Standard Operation shadow shields All shadow shields have been installed. Ladders, the pothole covers and the second rad survey will be done tomorrow.      81   Wednesday, February 10, 2016, 14:53 Travis Cave Cyclotron Standard Operation shadow shields All cyclotron in tank work is completed.      84   Thursday, February 25, 2016, 11:41 Travis Cave Cyclotron Standard Operation Ex 2C removal Ex 2C has been removed from the cyclotron. A trip into the tank was needed to free the probe, hung up on the usual spot.      85   Tuesday, March 01, 2016, 13:27 Travis Cave Cyclotron Standard Operation Ex 2C install EX 2C has been installed back into the cyclotron.      88   Thursday, April 07, 2016, 11:04 Travis Cave Cyclotron Standard Operation Closed the shield door The shield door on the B2 level of the RH building has been closed.      91   Tuesday, January 31, 2017, 14:41 Travis Cave Cyclotron Standard Operation Shield installation 200, 400, 500, 600, and a pallet of 700 series of shield have been installed in the cyclotron.      105   Tuesday, January 16, 2018, 13:43 Travis Cave Cyclotron Standard Operation Cyclotron in tank work  All cyclotron in tank work has been completed.      111   Tuesday, April 03, 2018, 11:57 Travis Cave Cyclotron Standard Operation Blue Shield Door Shut.  The Blue Shield Door on the B2 level of the RH building has been closed.      136   Wednesday, January 19, 2022, 09:50 Travis Cave Shielding Standard Operation Shield door is now open  The shield door is now open on the RH B2 level.      86   Wednesday, March 09, 2016, 17:09 Ron Kuramoto Cyclotron Development EX4N new housing installation The new EX4N housing assembly drawing TEC0071 (unfinished) was installed and connected to the EX4 tank side port flange over a 3      175   Tuesday, May 14, 2024, 10:53 Riley Sykes Carrier Maintenance Carrier underrail wheels maintenance  All 4 Under rail wheels serviced and cleaned. All Timken bearings repacked with grease. No defects in any bearing set.      176   Thursday, May 16, 2024, 12:33 Riley Sykes Service Bridge Maintenance Center Post Bearing  Center post bearing on service bridge inspected, turned freely by hand and regreased with Molub-Alloy 777-1 ES      177   Friday, May 31, 2024, 08:57 Riley Sykes Carrier Maintenance Carrier Drive motor/gear reducer  Motor/Gearbox unit removed from carrier and fully inspected and serviced. Oil changed on May 29th using Mobil 600 W Super Cylinder      178   Friday, May 31, 2024, 11:28 Riley Sykes Service Bridge Maintenance Outrigger mechanical inspection  Both outriggers were inspected and were found to be mechanically sound. No damage to components or hardware visible, will revisit      179   Friday, May 31, 2024, 12:47 Riley Sykes Trolleys serviced Maintenance Tool Trolley Scheduled Maintenance  60 month service completed. Bearings for drive motor wheels regreased, Reducer repacked with Molub Alloy 777-1 ES,      180   Monday, June 03, 2024, 14:29 Riley Sykes Trolleys serviced Maintenance Upper Resonator Trolley  24 Month, 60 month service completed. Bearings for drive motor      181   Tuesday, June 04, 2024, 14:29 Riley Sykes Trolleys serviced Maintenance Lower Resonator Trolley   12, 24 and 60      182   Wednesday, June 12, 2024, 10:35 Riley Sykes Trolleys serviced Maintenance Outriggers 1 and 2 Service  1,2 and 5 Year service completed. Vertical ball screws and chains inspected and regreased with Chemours Krytox EG 2000      183   Friday, June 14, 2024, 10:04 Riley Sykes Service Bridge Maintenance Service/ Bridge inspection  Yearly, 2 Year and 5 Year service completed. All bearings on support frames turn freely and were regreased with Molub      184   Monday, June 24, 2024, 12:53 Riley Sykes Elevation Jack Maintenance Highfield Service  Highfields 7A,7B post shutdown service complete. Oil change completed, new Mobil 600 W Super Cylinder oil added. Sample collected      186   Tuesday, July 23, 2024, 13:27 Riley Sykes Carrier Maintenance Service/Maintenance checks  1,2, 5 Year Service and maintenance package completed on Carrier. All reducers repacked with Molub-Alloy 777-1 ES grease.      188   Wednesday, July 24, 2024, 14:26 Riley Sykes Elevation Jack Maintenance Service inspection and relubrication  Jack 7R pulled apart and inspected for deficiencies, all parts deemed to be in working order, jack was rebuilt and lubricated      189   Wednesday, August 07, 2024, 14:24 Riley Sykes Elevation Jack Maintenance Service inspection and relubrication   Jack 7L pulled apart and inspected for deficiencies, alignment      142   Tuesday, May 10, 2022, 11:26 Nadia Jorgenson Cyclotron Repair Festooning rail rope and pulley system re-routed The rope and pulley system that is used to raise the festooning rail across the vault shield door has been re-routed. It now makes      143   Tuesday, May 10, 2022, 11:30 Nadia Jorgenson Cyclotron Repair Cracked Festooning Rail Bushing Removed  We removed the left bushing that is around the air cylinder on the festooning rail, right outside the cyclotron. It was      144   Tuesday, May 10, 2022, 11:31 Nadia Jorgenson Cyclotron Standard Operation Vault Shield Door Closed  The vault shield door has been closed and seal inflated. The operation      151   Tuesday, March 28, 2023, 12:02 Nadia Jorgenson Service Bridge Repair Outrigger 1 Failure and Repair   During the 2023 shutdown outrigger 1 failed. While      160   Tuesday, November 14, 2023, 12:13 Nadia Jorgenson Service Bridge Repair First Festooning Car "H" channel replacement  Damaged "H" channel removed from the first festooning car, and spare channel was put in place.      161   Tuesday, November 14, 2023, 12:38 Nadia Jorgenson Service Bridge Maintenance Bridge Orbit Counter Work in 2023  All the bearings on both the upper and lower wheel were replace to      103   Monday, January 08, 2018, 09:04 Maico Dalla Valle / Jason Kapalka Cyclotron Standard Operation Cyclotron Lid Up Remote Handing is ready for January, 8 2018 Cyclotron lid up. Elevating system service has been completed.      1   Monday, June 27, 2011, 10:38 John Wong General Routine Testing RH elog        156   Thursday, September 07, 2023, 13:21 Jason Zhang Service Bridge Development Outrigger #1 and #2 individual testing complete Outrigger #1 and #2 have had their controls system overhauled as part of the O503 project. The previous controls enclosure and the elements      159   Wednesday, October 18, 2023, 12:35 Jason Zhang Service Bridge Development O503 Bridge and Outrigger integration testing  Service bridge, Outrigger #1, and Outrigger #2 have had the controls system migrated to PLC controls. The 5069-AENTR      92   Monday, February 06, 2017, 20:32 Jason Kapalka Elevation Jack Maintenance 2017 Cyclotron Elevating System Maintenance The Cyclotron Elevating System planned maintenance work this year was performed on Jack Station #3, #8, #9, and #10.      95   Tuesday, February 28, 2017, 15:45 Jason Kapalka Cyclotron Standard Operation 2C extraction probe removal and reinstallation 2C extraction probe was removed from cyclotron tank on 2017-02-07 by RH and Probes group members with service       96   Friday, March 03, 2017, 13:30 Jason Kapalka Cyclotron Standard Operation CP continuity test Performed continuity test at Cyclotron center post with RH and Operations group members using the service bridge,       97   Tuesday, March 07, 2017, 09:31 Jason Kapalka Shielding Standard Operation Blockers/Shields/Covers/Ladders The seven copper blockers were removed from the Cyclotron tank by the RH group using the service bridge, lift       98   Tuesday, March 14, 2017, 11:23 Jason Kapalka Cyclotron Standard Operation Start/end of shutdown photo and video survey The start of shutdown photo and video survey was performed in the Cyclotron tank by the RH group using the       99   Tuesday, March 14, 2017, 12:02 Jason Kapalka Cyclotron Standard Operation Radiation survey The unshielded radiation survey was performed in the Cyclotron tank by the RH group using the service bridge,       100   Tuesday, March 14, 2017, 17:07 Jason Kapalka Probe Maintenance LE probe removal simulation exercise A simulated removal of the LE2 Probe from the Cyclotron tank was performed by the RH and Probes group using the       101   Tuesday, March 14, 2017, 17:28 Jason Kapalka Cyclotron Maintenance Lower resonator removal simulation exercice A simulated removal of a lower resonator from the Cyclotron tank was attempted by the RH group using the       102   Tuesday, March 14, 2017, 17:57 Jason Kapalka Cyclotron Standard Operation Lid raising and lowering operations Lid up (Attempt #1) Pre-indexed       104   Tuesday, January 09, 2018, 15:54 Jason Kapalka Cyclotron Standard Operation Lid-up sequence (in-tank work) 2018-01-09 07:00-10:00 - Pre-job meeting, informed main control room of operation startup, lowered      110   Friday, February 23, 2018, 15:44 Jason Kapalka Elevation Jack Repair Replacement of Elevating System wiring On January 8, 2018, while troubleshooting the Cyclotron Elevating System during the lid-up operation, the      21   Monday, March 18, 2013, 15:12 Isaac Earle Cyclotron Maintenance Cyclotron Magnet Face Gap Measurements Measurements of the cyclotron magnet face gap were taken on March 15, 2013 at two locations around the tank with the cyclotron lid in  8x    71   Wednesday, September 30, 2015, 11:26 Isaac Earle Elevation Jack Standard Operation Station 9 Jack Right Side - Unusual Wear Investigation The following people were consulted regarding the unusal wear noticed on jack station #9 right side  7x    72   Wednesday, September 30, 2015, 11:52 Isaac Earle Elevation Jack Standard Operation Station 9 Jack Left Side - Inspection & Service Status The left side jack was disassembled and cleaned.  It was discovered that the left side had been rebuilt with a new jack  15x    82   Tuesday, February 16, 2016, 16:32 Isaac Earle Cyclotron Standard Operation HE1 Probe Removed from Cyclotron The HE1 Probe was removed from the cyclotron this morning following the procedure in Document-126165 (currently in draft status, to be released      83   Friday, February 19, 2016, 10:17 Isaac Earle Cyclotron Standard Operation HE1 Probe Installed in Cyclotron  The HE1 Probe was reinstalled into the cyclotron this morning following Section 3.2 in Document-126165 (to be reviewed and      93   Thursday, February 09, 2017, 15:21 Isaac Earle Cyclotron Standard Operation HE2 Probe Removed  The HE2 probe was removed from the cyclotron today following      94   Tuesday, February 21, 2017, 13:40 Isaac Earle Cyclotron Standard Operation HE2 Probe Returned to Cyclotron  The HE2 probe was reinstalled in the cyclotron this morning following the procedure in Document #126165.  An orbital      106   Thursday, January 25, 2018, 17:16 Isaac Earle Cyclotron Standard Operation HE1 probe removed  The HE1 probe was removed from the cyclotron today using the procedure in Document 126165.  The reason for removal is so      107   Wednesday, January 31, 2018, 11:20 Isaac Earle Cyclotron Standard Operation HE1 probe reinstalled  HE1 probe was reinstalled in the cyclotron this morning as per the procedure in Document 126165.  Hardware for the      2   Tuesday, February 07, 2012, 18:09 Grant Minor Service Bridge Repair Service Bridge Center Post Bearing Maintenance and Orbit Counter (2011/2012) Repair of Orbit Limit Switch Plastic Belt During      3   Tuesday, February 14, 2012, 15:40 Grant Minor Trolley Standard Operation 2C Removal - all 4 QDLs were actuated remotely this year! Today Remote Handling staff (Maico Dalla Valle, Travis Cave) used the Remote Handling 2C probe removal trolley to remove the probe      7   Tuesday, January 29, 2013, 18:49 Grant Minor Elevation Jack Standard Operation Lid-up complete - summary notes Lid-up was first attempted yesterday (Jan 28th) by Dan Louie, Arthur Leung, and Maico Dalla Valle.  They experienced problems      8   Wednesday, January 30, 2013, 14:44 Grant Minor Elevation Jack Standard Operation Further lid-up notes from Dan Louie Dan Louie's e-mail comments from 30 Jan 2013 are attached. - Grant      9   Monday, February 04, 2013, 13:52 Grant Minor Service Bridge Repair Hydraulic cylinder failure on service bridge The hydraulic cylinder on the West side of the service bridge (used to raise the bridge for insertion into the Cyclotron)  6x    10   Wednesday, February 06, 2013, 17:42 Grant Minor Elevation Jack Maintenance In-situ jack power screw lubrication inspection - Stations 9, 10, 11, and 6 Due to concerns raised regarding the state of the lubrication of the power screws at Station 9, the lubrication was visually inspected  16x    11   Wednesday, February 06, 2013, 17:50 Grant Minor Elevation Jack Maintenance Service records compiled by G. Minor Attached is a compiled record showing the years of service of the jacks, upper bearing, and gear reducers, prepared by Grant Minor      12   Wednesday, February 06, 2013, 18:07 Grant Minor Elevation Jack Maintenance Lid-down yoke gap measurements from 1994 Attached is a scan of a handwritten record from 1994 showing yoke-to-upper-structure gap measurements from 1994, both L and R      16   Friday, March 08, 2013, 18:42 Grant Minor Cyclotron Repair Tank lid not at upper limit and resulting effects This morning during routine service bridge work in the Cyclotron tank, it was observed by Travis Cave that the cable tray for the      17   Monday, March 11, 2013, 19:43 Grant Minor Cyclotron Repair Adjustment of tank lid upper limit by 1/4" upwards This morning Don Jackson commented to Grant Minor that he believed the tank lid was still not raised high enough to safely operate      18   Thursday, March 14, 2013, 19:57 Grant Minor Cyclotron Repair Tank lid upper / over travel limit check Today Grant Minor, Dan Wright, Arthur Leung, and Dan Louie checked the height difference between the tank lid upper travel limit switch      20   Friday, March 15, 2013, 15:18 Grant Minor Cyclotron Standard Operation Lid Down Successful - Mechanical Counter Readings Prior to the lid-down operation today, the Cyclotron was lowered by 0.75" and then raised again to confirm that the upper      22   Tuesday, March 19, 2013, 19:17 Grant Minor Elevation Jack Standard Operation Re-indexing of all jack station "zero" yoke elevations The dimension between the yokes and the Cyclotron upper structure primary beams was set to .25" nominal at all jack stations      23   Thursday, April 11, 2013, 19:00 Grant Minor Elevation Jack Maintenance Upper Bearing at Jack Station 9 + Fall Protection Upgrades There was a brief access period to the Cyclotron vault during April 9 to 12, 2013 due to other Cyclotron issues.      27   Monday, January 20, 2014, 12:00 Grant Minor Elevation Jack Standard Operation Indexing Check of Cyclotron Jack Stations Maico Dalla Valle and Grant Minor, supported by Dan Louie and Arthur Leung, entered the Cyclotron Vault on January 15th, 2014 to      28   Thursday, January 23, 2014, 18:47 Grant Minor Elevation Jack Standard Operation Cyclotron Lid-Up Report - 22 Jan 2014 Yesterday Grant Minor (me), Maico Dalla Valle, Dan Louie, and Arthur Leung worked with Operations to perform the Cyclotron  6x    41   Monday, March 03, 2014, 15:07 Grant Minor Elevation Jack Standard Operation Cyclotron Lid-Down Report Monday 3-March-2014 The Cyclotron Lid Down was successfully completed today on Work Permit C2014-03-03-6. The system only tripped twice on      44   Wednesday, July 02, 2014, 16:46 Grant Minor Elevation Jack Standard Operation Cyclotron Lid-Up Report for 27 June 2014 The cyclotron lid was raised on June 27th, 2014.  Start time was 1:05pm end time was 2:17pm (good!) Dan McDonald collected      46   Tuesday, January 13, 2015, 16:46 Grant Minor Elevation Jack Development Upper Bearing Fall Protect Guardrails TRH1217 Installed on Stns 8,10, 3, 4 & 5 5 x TRH1217 Upper Bearing Service Platform assemblies were installed between January 6th and January 13th at Stations 8, 10, 3,  9x    49   Tuesday, January 27, 2015, 11:39 Grant Minor Elevation Jack Standard Operation Lid-Up Report 26 Jan 2015 Normal 0      59   Friday, March 06, 2015, 16:42 Grant Minor Elevation Jack Standard Operation Lid-Down Report 6-March-2015 Lid down started around 2:30 pm today (March 6th, 2015) Master Start: 47422      64   Thursday, March 26, 2015, 15:48 Grant Minor Elevation Jack Standard Operation Cyclotron Lid-Up 26 March 2015 Lid was raised today (2nd time during 2015 shutdown) for additional inflector work. Dan and Maico report that the lid      68   Thursday, April 16, 2015, 15:26 Grant Minor Elevation Jack Maintenance Cyclotron Elevating System Maintenance Rotation Record - Updated 16 Apr 2015        70   Thursday, September 17, 2015, 18:38 Grant Minor Elevation Jack Maintenance Station 9 Jack Worm Gear Inspection - unusual wear markings 16Sept2015 Unusual wear markings were observed on the Station 9 jack (not sure if L or R jack?) during a visual inspection.  8x    75   Tuesday, January 19, 2016, 17:59 Grant Minor Elevation Jack Development Upper Bearing Fall Protection Installation - Stations 1, 2, 6, 7, 8, 11, & 12 The installation of the upper bearing fall protection equipment was completed last week by Dan and Maico.  22x    150   Friday, February 03, 2023, 08:27 Eric Lahe Elevation Jack Maintenance Elevating System Jack Inspection  Annual Jack Inspection: The annual elevation system inspection has been completed (Jan 31,2023).      164   Wednesday, January 31, 2024, 15:06 Eric Lahe Elevation Jack Maintenance Elevating System - Annual Station Swap 2023-2024  The annual elevating system maintenance for the 2023-2024 shutdown following Document-220322,  Work done after electrical lockout      4   Friday, February 17, 2012, 15:07 Don Jackson Trolley Repair Video Trolley Failed in Cyclotron Tank All control to the video trolley was lost during remote photographing of components in the cyclotron. The control system and      19   Friday, March 15, 2013, 08:39 Don Jackson Cyclotron Standard Operation Pre Lid Down In Tank Video Survey In tank survey completed.  A few items of interest were found.  Ladders need to moved manually outboard to #5 resonators      108   Friday, February 02, 2018, 14:14 Don Jackson Trolley Repair Overcurrent on radial drive motor          43   Monday, April 28, 2014, 10:20 Dan McDonald Service Bridge Maintenance Bridge orbit reduction box Noticed oil leaking out of reduction box, scan and swipe, disconnect e motor and all related cables from bridge, remove motor      45   Friday, July 04, 2014, 07:21 Dan McDonald Elevation Jack Standard Operation Cyclotron lid down July-2- 2014 Cyclotron lid down was successfully completed on July 2 2014. Lid went partially down before jack nine had to be jogged to catch up to      56   Tuesday, February 17, 2015, 07:10 Dan McDonald Trolleys serviced Maintenance Pre shut down trolley service Routine maintenance as per Mike Gallop's written procedure took place in December with the only non routine service being the      65   Friday, March 27, 2015, 07:31 Dan McDonald Cyclotron Repair Lid up operations Lid up recap for  March 26th 2015. Start time 14:50             67   Thursday, April 02, 2015, 12:09 Dan McDonald Cyclotron Standard Operation Lid Down operations April, 2, 2015 Lid down Start at 11:17, lid went down without any issues or stop's. Lid finish at 11:45       69   Tuesday, July 28, 2015, 11:47 Dan McDonald Trolley Maintenance Camera trolley service Serviced the Camera trolley this morning as per Mike Gallops service outline.      77   Wednesday, February 03, 2016, 08:16 Dan McDonald Cyclotron Standard Operation Cyclotron lid up Lid up procedure Started at  12:00pm. Initial numbers. # 1-47,2-49,3-45,4-47,5-47,6-47,7-49,8-45,9-50,10-50,11-51,12-49. After a number of unsuccessful attempts at      87   Tuesday, March 15, 2016, 13:56 Dan McDonald Cyclotron Standard Operation Lid Down 2016 Lid down Started at 12:15, station and count numbers. Lid went down with out incident as station 1 and 7 show the counters will      89   Thursday, June 30, 2016, 13:47 Dan McDonald Trolley Maintenance Lift trolley Maintenance has been performed on the lift trolley, re sealed the main drive gear box it was quite dry inside and in need of new      90   Wednesday, September 14, 2016, 11:30 Dan McDonald Elevation Jack Maintenance Jack station 10B Annual jack maintenance : Jack 10b upon inspection it was found that the output shaft seal on 10b was in need of replacement. In  14x    112   Tuesday, January 22, 2019, 07:18 Dan McDonald Elevation Jack Maintenance Station 11-12 jack swap and hoist plate instal Prior to commencing work on jacking stations we installed a wall mounted come along plate as per Jason kapalkas instructions        115   Thursday, January 30, 2020, 06:55 Dan McDonald Cyclotron Standard Operation Lid up operations Lid up operations took place on January 21st starting at 10:25 lid went up without issue. Couple things to note are station      120   Saturday, April 04, 2020, 09:47 Dan McDonald Cyclotron Standard Operation Lid down operations Lid down operations for 2019/2020 shutdown went ahead as planned on March 10th 2020 with Dan Louie and Arthur Leung absent due      121   Saturday, April 04, 2020, 10:03 Dan McDonald Trolley Development Addition of DC motor controller mounts Upper and lower resonator trolleys received mounting plates and brackets to accommodate DC motor controls for updated drive motors.      122   Sunday, April 05, 2020, 13:24 Dan McDonald Elevation Jack Maintenance Elevating system station swap 2019-2020 Station 11-12 where swapped for station 13-14 during 2018-2019 shutdown. Once lock out and motor disconnect was complete we      32   Wednesday, January 29, 2014, 15:08 Bevan Moss Cyclotron Standard Operation Shielding and Port Hole Covers  The Shielding and the Port Hole Covers have all been installed. No issues with the installation have caused any problems. This      36   Friday, February 21, 2014, 11:05 Bevan Moss Cyclotron Standard Operation Old Monitor Box Removed, New installed  One of the beam spill monitor boxes was removed and placed into a lead coffin. The fields around the coffin prior to the  7x    37   Friday, February 21, 2014, 15:58 Bevan Moss Cyclotron Standard Operation Old Monitor Box Removed, New installed During the electrical test the was no contact.  To help investigate further the Montitor box was removed from the Cyclotron. It was      113   Wednesday, September 04, 2019, 15:29 Adam Newsome Trolley Maintenance Connector faceplate and tubing upgrade Tool Trolley:  The connector faceplate was replaced with a new version to allow for more space      114   Thursday, October 31, 2019, 14:31 Adam Newsome Service Bridge Repair Outrigger 2 Vertical Drive Repair Outrigger 2 vertical drive repair is complete - ball screws were replaced to resolve a jamming issue (this work was done in the      116   Monday, February 03, 2020, 11:06 Adam Newsome Cyclotron Development Porthole Cover Handling Tool - Initial Test Report The suction-cup based porthole cover handling tool (TRH1366) was tested for the first time inside the cyclotron as part of the regular      117   Wednesday, February 05, 2020, 12:37 Adam Newsome Cyclotron Development Cyclotron Vacuum Cleaning Tool - Initial Test The vacuum cleaning tool (TRH1366, vacuum cleaning configuration) was tested in the cyclotron tank. The following test were performed:      118   Wednesday, February 05, 2020, 12:44 Adam Newsome Cyclotron Development Cyclotron Small Object Retrival Tool - Intial Test The small object retrieval tool was tested in the cyclotron tank for the first time. At this time, there are no known accessible      119   Wednesday, February 05, 2020, 15:04 Adam Newsome Trolley Repair Upper resonator trolley: cylinders for Ex 2C tasks [B]Cylinder 4[/B] on the upper resonator trolley was not fully functional when removing Ex 2C during 2020 shutdown. It worked occasionally.      123   Thursday, July 16, 2020, 11:57 Adam Newsome Cyclotron Development Cyclotron Mockup: Orbital Position Pendant Upgrade The pendant used for controlling the orbital motion of the bridge mockup was upgraded. Features of the new pendant include:      124   Thursday, November 05, 2020, 15:38 Adam Newsome Infrastructure Development New crane pendant: B1 level crane A new remote crane pendant was installed to replace the existing wired pendant on the B1 level of Remote Handling building      125   Monday, November 09, 2020, 09:17 Adam Newsome Infrastructure Development New crane pendant: B2 level crane A new remote crane pendant was installed to replace the existing  wired pendant on the B2 level of Remote Handling building      126   Wednesday, January 13, 2021, 11:35 Adam Newsome Shielding Maintenance Shadow Shields Inspection - 2021 Shutdown All shadow shields which are remotely placed inside the cyclotron during shutdown were inspected by Adam Newsome and Chris Peterson      127   Friday, January 22, 2021, 14:30 Adam Newsome Cyclotron Standard Operation Lid up operation - 2021 The lid up operation took place on Jan. 22, 2021. The      128   Wednesday, February 03, 2021, 12:37 Adam Newsome Cyclotron Development Ladder Handling Tool - First In-Tank Test (SAS0824) The newly developed Ladder Handling Tool (TRH1401), which is used to move the maintenance ladders from the #5 resonator area closer      129   Friday, February 26, 2021, 08:29 Adam Newsome Trolleys serviced Maintenance First Turn Radial Flag (FTRF) Jig - Pneumatic Upgrade Old fittings and broken pneumatic tubing on the FTRF jig have been replaced with new push-connect fittings and polyurethane tubing.      130   Friday, February 26, 2021, 13:00 Adam Newsome Trolleys serviced Maintenance Lower Resonator Trolley - Radial Drive Failure Issue On Feb. 24 while practising a training exercise, the lower resonator trolley unexpectedly experienced a radial drive failure. The trolley      131   Thursday, April 01, 2021, 13:47 Adam Newsome Cyclotron Standard Operation Vault Shield Door Closed The vault shield door has been closed and seal inflated. The operation was performed with no issue.       132   Tuesday, April 20, 2021, 15:02 Adam Newsome Carrier Development Emergency Trolley Rescue Winch: Installed and Tested An emergency trolley rescue winch (TRH1527) was developed for the purposes of retrieving trolleys from the cyclotron tank whose radial      133   Wednesday, May 05, 2021, 12:20 Adam Newsome Infrastructure Development Cyclotron RH Control Room: Outlets Installed The following outlets were installed by Electrical Services Group in order to facilitate upgrading power supplies for Cyclotron Remote      134   Wednesday, June 16, 2021, 09:59 Adam Newsome Service Bridge Development Bridge Lift Mechanism Refurbishment (Phase 1 of 2) - Complete The following items from Phase 1 of 2 of Bridge Lift Mechanism Refurbishment (O504) are complete:      135   Tuesday, August 31, 2021, 14:28 Adam Newsome Trolleys serviced Development Upper Resonator Trolley - Finger Cylinders Replaced The two support fingers on the upper resonator trolley were bent due to excessive loading during cylinder toggling.      137   Friday, February 04, 2022, 11:52 Adam Newsome Cyclotron Standard Operation Lid up operation - 2022 The lid up operation took place on Feb. 4, 2022.       138   Tuesday, February 08, 2022, 11:39 Adam Newsome Cyclotron Development Radiation Survey - sampling rate error When attempting to perform the radiation survey, the program displayed an error at startup stating that the software was not      139   Monday, March 21, 2022, 13:14 Adam Newsome Trolley Repair Video Trolley Mk 1 - Radial Limit Switch Replacement An issue was observed in which radial motion on the Video Trolley Mk 1 did not respond to commands. After troubleshooting, it was      140   Wednesday, April 27, 2022, 16:05 Adam Newsome Cyclotron Standard Operation Lid down operation - 2022 The lid down operation took place on Apr. 27, 2022.       141   Wednesday, May 04, 2022, 12:07 Adam Newsome Trolley Development Tool Trolley: Brass air fittings replacement complete All of the old brass air fittings on the Tool Trolley have now been swapped over to push-connect style fittings. As these are      145   Wednesday, June 29, 2022, 12:12 Adam Newsome Probe Development LE1/LE2 Probe Frame - Updates The LE1/LE2 Probe Frame was mounted on the Upper Resonator Trolley in the mockup with the intention of confirming functionality      146   Thursday, October 06, 2022, 17:15 Adam Newsome Elevation Jack Maintenance Preventative Maintenance: MCC-E elevating system motor contactors Under work permit C2022-10-04-1, the motor contactors for jack motors 1 through 12 were replaced. The contactors showed signs      147   Friday, January 27, 2023, 12:12 Adam Newsome Infrastructure Development Vault crane - inspection, remote pendant installation The vault crane annual inspection was completed by Tom Kauss.         148   Monday, January 30, 2023, 12:20 Adam Newsome Cyclotron Standard Operation Lid up operation - 2023  The lid up operation took place on Jan. 30, 2023.       152   Friday, March 31, 2023, 13:22 Adam Newsome Cyclotron Standard Operation Lid down operation - 2023 The lid down operation took place on Mar. 31, 2023.       153   Wednesday, April 26, 2023, 11:19 Adam Newsome Cyclotron Standard Operation Vault Shield Door Closed The vault shield door has been closed and seal inflated. The operation was performed with no issue.      154   Friday, July 28, 2023, 12:05 Adam Newsome Cyclotron Development Maintenance ladders: end caps added The original end feet and end caps were removed from the maintenance ladders and replaced by new end caps (TRH1637).      155   Thursday, August 03, 2023, 10:43 Adam Newsome Trolley Development Previous generation video trolley decommissioned The "old" video trolley featuring scissor mechanism and DSLR camera has officially been decommissioned. Going forward, Video      157   Thursday, September 14, 2023, 13:51 Adam Newsome Trolley Maintenance Lift Trolley: upgrades to camera tilt mechanism The two camera tilt mechanisms on the lift trolley have been upgraded. Upgrades include: For the individual camera:      158   Friday, September 15, 2023, 10:15 Adam Newsome Trolley Maintenance Lift Trolley: mirror actuation mechanism repair/upgrade The mirror actuation mechanism was observed to be "sticky" during 2023 winter shutdown - it occasionally did not function      162   Tuesday, January 23, 2024, 14:03 Adam Newsome Elevation Jack Maintenance Inspection of elevating system motor contacts Motor contactors for the cyclotron elevating system jacks were inspected on 2025-01-23 by Joel Semilla under work permit C2024-01-19-1.      163   Wednesday, January 31, 2024, 11:39 Adam Newsome Elevation Jack Maintenance Jack station 11: synchro replaced Because of observed noise on the synchro at jack station 11 during recent shutdown lid up/down operations, the synchro at this      165   Wednesday, February 07, 2024, 12:04 Adam Newsome Elevation Jack Repair Elevating system - brake master relay fuse issue It was observed when attempting lid up operation on 2024-02-06 that the brakes for each of the jacks were not operating correctly.      166   Thursday, February 08, 2024, 08:50 Adam Newsome Elevation Jack Maintenance Elevating system - station 10 motor contactor issue It was observed during lid up operation on 2024-02-08, approximately halfway through raising the lid, that the motor contactor      167   Friday, February 09, 2024, 15:43 Adam Newsome Elevation Jack Standard Operation Lid up operation - 2024 The cyclotron lid was raised starting ~10:30am on 2024-02-06 and finishing at ~3:30pm on 2024-02-08, under work permit C2024-02-06-4.      168   Friday, February 16, 2024, 11:11 Adam Newsome Trolley Repair Lift Trolley: vertical motion failure, motor relays replaced Today (2024-02-16) when operating the lift trolley to install shields in the cyclotron, the vertical motion was observed to be intermittently      169   Monday, February 26, 2024, 11:52 Adam Newsome Cyclotron Repair Controls issue - CAMAC power supply An issue was encountered on 2024-02-23 when attempting to operate the lift trolley.      170   Friday, April 19, 2024, 15:18 Adam Newsome Cyclotron Standard Operation Lid down operation - 2024 The lid down operation took place on April 19, 2024.       171   Wednesday, April 24, 2024, 14:26 Adam Newsome Elevation Jack Standard Operation Lid up operation (second) - 2024 Due to an issue with resonator latching, there was a need to raise the cyclotron lid a second time this shutdown.      172   Tuesday, April 30, 2024, 15:00 Adam Newsome Cyclotron Standard Operation Lid down operation (second) - 2024 A second lid down operation took place on April 30, 2024.       173   Thursday, May 02, 2024, 12:42 Adam Newsome Elevation Jack Standard Operation Lid up operation (third) - 2024 The cyclotron lid was raised starting ~11:45am on 2024-05-02 and  finishing at ~12:12pm under work permit C2024-05-02-5.       174   Tuesday, May 07, 2024, 09:35 Adam Newsome Elevation Jack Standard Operation Lid down operation (third) - 2024 A third lid down operation took place over May 6-7, 2024.      185   Wednesday, July 17, 2024, 15:02 Adam Newsome Infrastructure Standard Operation Safety Walkaround Complete - RH Shop, Back Shop, B1, and B2 levels A safety walkaround for July 2024 was completed for the B1 and B2 levels by A. Newsome, and for the main shop and back shop by R. Sykes.      187   Wednesday, July 24, 2024, 11:39 Adam Newsome Cyclotron Standard Operation Investigation of faulty Al-ALCW signal Fault 16710 was initially assigned to Remote Handling:       190   Thursday, October 10, 2024, 12:30 Adam Newsome Infrastructure Standard Operation Safety Walkaround Complete - RH Shop, Back Shop, B1, and B2 levels A safety walkaround was completed for the RH Shop, Back Shop, B1, and B2 levels.  The resulting spreadsheet can be      191   Wednesday, October 16, 2024, 11:37 Adam Newsome Service Bridge Development Bridge Lift Mechanism Refurbishment (Phase 2 of 2) - Complete See previous e-log for phase 1: e-log 134    6x    192   Friday, January 03, 2025, 10:20 Adam Newsome Infrastructure Standard Operation Safety Walkaround Complete - RH Building B1 and B2 Level A safety walkaround was completed for the RH building  B1 and B2 levels. The resulting spreadsheet can be      193   Monday, January 06, 2025, 13:57 Adam Newsome Infrastructure Standard Operation Safety Walkaround Complete - RH Building Shop and Back Shop A safety walkaround was completed for the RH building shop and back shop.  The resulting spreadsheet can be

Goto page 1, 2, 3 ... 8, 9, 10

ELOG V2.9.2-2455