ELOG RH-ISAC

Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL

RH-ISAC, Page 45 of 141

Not logged in

Back | Find | Select | Help | Login

Full | Summary | Threaded | Show attachments

2814 Entries

Goto page Previous 1, 2, 3 ... 44, 45, 46 ... 139, 140, 141 Next

ID	Date	Author	Category	Type	Module	Target/Number	Subject
1133	Wednesday, November 25, 2015, 11:52	Travis Cave	South Hot-Cell	Standard Operation	TM4	Ta#46	Module moved
Yesterday TM#4 with Ta#46 was moved from the east station to the south hot cell.
1141	Thursday, November 26, 2015, 08:52	Travis Cave	Spent Target Vault	Standard Operation		Ta#46	Spent Target move
Ta#46 was placed in the ISAC spent target vault yesterday. See attached PDF for details.
867	Monday, March 23, 2015, 14:03	chad fisher	South Hot-Cell	Standard Operation		Ta#45	Ta#45 inserted into hot cell
Ta#45 has been inserted into the hot cell. Swipe taken of inner tool port area: 100000 counts/min.
869	Tuesday, March 24, 2015, 09:47	chad fisher	South Hot-Cell	Standard Operation	TM4	Ta#45	Ta#45 installed
Ta#45 has been installed onto TM4 and is ready for leak and electrical check. High current fasteners torqued to 130 in.lbs.
870	Tuesday, March 24, 2015, 13:57	Travis Cave	South Hot-Cell	Standard Operation	TM4	Ta#45	Electrical check
TM#4 electrical checks with and without the target installed, installed target is Ta#45.
872	Wednesday, March 25, 2015, 14:25	David Wang	South Hot-Cell	Standard Operation	TM4	Ta#45	Leak check on TM4 HS water line with new Ta#45 target. at SHC
Chad and I leak checked TM4 HS water line with new Ta#45 target installed at SHC. Leak detector base leak rate 0.0Xe-9 atm.cc/sec, base pressure 0.0Xe-4 torr. Chad sprayed helium twice on each of HS 2 VCR joints.No leak has been found. The joints are leak tight. The helium pressure test will be done at CS later.
873	Wednesday, March 25, 2015, 14:34	David Wang	Conditioning Station	Standard Operation	TM4	Ta#45	TM4 and CS turbo- pumps are started .
I connected TM4 and CS vacuum system after TM4 move. CS roughing pump was started first this morning. Later, Anders, Bill and I started 3 turbo pumps on TM4 and CS. The pumping down is good so far. The CS vacuum system ion gauges are turned on also.
874	Thursday, March 26, 2015, 09:20	Travis Cave	Conditioning Station	Standard Operation	TM4	Ta#45	Electrical check
Electrical check of TM#4 with Ta#45 at the conditioning station, see attached pdf for details.
875	Friday, March 27, 2015, 10:03	David Wang	Conditioning Station	Standard Operation	TM4	Ta#45	Helium pressure test on TM4 HS line at CS
The helium pressure test on TM4 HS line at conditioning station is done. No leak. I also leak checked all vacuum seals on TM4 service cap. They are all good.
876	Friday, March 27, 2015, 11:29	David Wang	Conditioning Station	Standard Operation	TM4	Ta#45	TM4 is connected at CS
TM4 has been connected at CS which includes high current cables, water lines, EE cable, and Enizel lens cable. The HV cover has been installed onto the TM4 service cap.The CS water system is started. All water signals are good so far. Anders will start HV and heaters conditioning on next Monday.
878	Monday, March 30, 2015, 09:03	Anders Mjos	Conditioning Station	Standard Operation	TM4	Ta#45	Ta#45 Conditionoing
Monday, March 30, 2015, 08:59: Reset chiller by switching on off power (fault 2) Monday, March 30, 2015, 09:02: Switched on CHILL:CP2, TS5 at 34 C Monday, March 30, 2015, 10:24 : Cage locked. EE to GND. BIAS and EL ON. Troubleshooting BIAS current limiting. Turned out to be a EPICS initialization issue. Resolved by setting/changing the current limit again in EPICS. Monday, March 30, 2015, 14:00: BIAS/EL 18 / 9 kV Monday, March 30, 2015, 14:16: BIAS/EL 24 / 12 kV Monday, March 30, 2015, 16:03: BIAS/EL 30 / 15 kV. Occasional sparking while stepping up since 26 kV Monday, March 30, 2015, 16:13: BIAS/EL 30.8 / 15 kV. 110% of scheduled 28 kV. BIAS/EL 0.04 / 0.09 mA Monday, March 30, 2015, 17:26 : Maintained BIAS over 1 hour. One spark after. Monday, March 30, 2015, 17:27 : BIAS / EL off. Tuesday, March 31, 2015, 08:12: Cage access. EE to EE PS. Cage locked. Tuesday, March 31, 2015, 08:24: BIAS/EL/EE at 30.8 / 15 / 1 kV Tuesday, March 31, 2015, 08:26 : EE to 2 kV, 1.96 mA Tuesday, March 31, 2015, 08:46: No sparks for 20 min. Tuesday, March 31, 2015, 08:48 : BIAS/EL/EE at 20 / 9.3 / 1.5 kV Tuesday, March 31, 2015, 08:57: Started auto ramping of heaters to 580 / 230 A at 2 A/min. Tuesday, March 31, 2015, 10:54: TBHT at 230 A Tuesday, March 31, 2015, 14:05: TGHT at 580 A Tuesday, March 31, 2015, 14:21: BIAS/EL/EE to 30.8 / 15 / 2 kV Tuesday, March 31, 2015, 17:48: Source stable for 4h Tuesday, March 31, 2015, 18:20: Lowered IAS/EL/EE to 20 / 9.3 / 1.5 kV. IG2 at 6.2E-6 T Tuesday, March 31, 2015, 21:27: Starting ramp down at 15/12 A/min. IG2 at 6.8E-6 T Tuesday, March 31, 2015, 21:51: BIAS/EL/EE to zero and off. IG2 at 6.6E-6 T Tuesday, March 31, 2015, 22:17: TGHT and TBHT off Tuesday, March 31, 2015, 22:41: Turbos off. Tuesday, March 31, 2015, 22:42: Water off.
880	Wednesday, April 01, 2015, 06:56	David Wang	Conditioning Station	Standard Operation	TM4	Ta#45	TM4 has been disconnected at CS.
TM4 has been disconnected at CS. The CS and TM4 is venting for move. Anders stopped vacuum and water system yesterday.
881	Wednesday, April 01, 2015, 10:52	Travis Cave	ITE	Standard Operation	TM4	Ta#45	Module move
TM#4 with Ta#45 has been moved from the conditioning station to the east target station.
883	Wednesday, April 01, 2015, 13:12	David Wang	ITE	Standard Operation	TM4	Ta#45	TM4 has been connected in ITE
TM4 has been connected in ITE. ITE six turbo-pumps have been started. So far so good.
921	Monday, June 01, 2015, 11:23	Travis Cave	ITE	Standard Operation	TM4	Ta#45	Module moved
TM#4 with Ta#45 has been moved from the east target station to the south hot cell.
922	Monday, June 01, 2015, 14:24	Travis Cave	South Hot-Cell	Standard Operation	TM4	Ta#45	Electrical Check
Post beam electrical check on the Ta#45 target installed on TM#4. See attached PDF.
1078	Wednesday, September 23, 2015, 14:32	David Wang	Conditioning Station	Standard Operation	TM4	Ta#45	Helium pressure test on TM4 HS line at CS
Helium pressure test HS line at CS with 70 psi for 2 minutes. Base leak rate 0.0xE-9atm.cc/sec. No response. The line is leak tight.
752	Tuesday, September 23, 2014, 12:24	chad fisher	South Hot-Cell	Standard Operation	TM4	Ta#44	Ucx10 removed Ta#44 installed
Ucx#10 has been removed from TM4 and placed in a pail with argon. Ta#44 has been installed onto TM4 and target heater bolts torqed to 130 in.lbs.
754	Wednesday, September 24, 2014, 10:41	Travis Cave	ITE	Standard Operation	TM4	Ta#44	module move
TM#4 with Ta#44 has been moved from the south hot cell to the east target station.
755	Wednesday, September 24, 2014, 15:03	David Wang	South Hot-Cell	Standard Operation	TM4	Ta#44	Leak check on TM4 HS water line with new Ta#44 target. at SHC
This morning Chad and I leak checked TM4 HS line with new Ta#44 target installed. I calibrated LD before the check. Before check, the LD base LR 0.0xE-9 atm.cc/sec, base LP 0.0xE-4 torr. Chad sprayed helium on both VCR fittings and did a flush around the target. There is no any response had been found on LD,. The line is good on leak tight. with spray method. No helium pressure test on the HS line at CS since TM4 was moved back to ITE directly.

Goto page Previous 1, 2, 3 ... 44, 45, 46 ... 139, 140, 141 Next

ELOG V2.9.2-2455