ELOG RH-ISAC

Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL

RH-ISAC, Page 132 of 140

Not logged in

Back | Find | Select | Help | Login

Full | Summary | Threaded | Hide attachments

2786 Entries

Goto page Previous 1, 2, 3 ... 131, 132, 133 ... 138, 139, 140 Next

ID	Date	Author	Category	Type	Module	Target/Number	Subject
1804	Wednesday, October 10, 2018, 10:50	Travis Cave	Conditioning Station	Standard Operation	TM4	Ta#57	Electrical Check
The various electrical check done on TM#4 after the UC run and before the start of the Ta run.
Attachment 1: TM#4_UC#24_Electrical_Check_SHC.pdf

Attachment 2: TM#4_Elec_Chk_No_Target_Oct-3-2018.pdf

Attachment 3: TM#4_Elec_Chk_SHC_Ta#57.pdf

1810	Friday, October 26, 2018, 09:44	Travis Cave	Conditioning Station	Standard Operation			Exit Module moved
The west exit #2 module has been moved from the south hot cell to the conditioning station.
1811	Monday, October 29, 2018, 10:43	David Wang	Conditioning Station	Repair			ITW exit 2 leak check at TCS.
I did a leak check this morning on exit 2 module at TCS. LD base leak rate is 4.00XE-9atm.cc/sec, Base pressure is 0.00 X E-4 torr. All seals, bellows, and flanges are checked. The new FC5 bellow is good. There is a big leak up to 2X E-6 atm.c/sec has been found on IG1S side panel . The panel itself will be replaced this time. Machine shop is working on it.. Two small leaks in E-9 atm.cc/sec range have been found on the o-ring between service cap steel welding frame and the whole cap top cover plate in different location . All bolts on the top plate pressing down the o-ring are very tight. I can do nothing on them. However, I sprayed some vacuum seal around the leak area. The leaks are small and close to ITE TP1S. I don not think we have to replace it at this moment. Basically, The module is good to move to ITW tomorrow morning.
1813	Wednesday, October 31, 2018, 14:20	Travis Cave	Conditioning Station	Standard Operation	TM2	UC#25	Module move
TM#2 with UC#25 has been moved from the south hot cell to the conditioning station.
1815	Thursday, November 01, 2018, 11:42	David Wang	Conditioning Station	Standard Operation	TM2	UCx 25.	TM2 HS line helium pressure test at TCS and helium spray at SHC..
Chad and I did leak check on TM2 HS line at SHC yesterday. Base LR 0.0XE-9 atm.cc/sec. No response on LD. during helium spray. Today , I did helium pressure test at TCS. base LR 0.0xe-9atm.cc/sec. applied 70psi helium for 3 minute. leak rate slowly climbed to2.2 Xe-7 atm.cc/sec ate stopped there. The result is close to before.
1817	Monday, November 05, 2018, 14:27	Anders Mjos	Conditioning Station	Standard Operation	TM2	UC#25	Target module disconnected
Frank and Anders disconnected the water and electrical connections this afternoon after the target was conditioned over the weekend. The heater ramping program ran with the wrong gauge selected, causing the vacuum to go higher than planned. The module will be moved to ITW tomorrow.
1829	Wednesday, November 28, 2018, 06:39	David Wang	Conditioning Station	Standard Operation			Disconnection checklist LpTa #56
TM4 was disconnected in ITE. Checklist list in attachment.
Attachment 1: LpTa#56_disconnection_checklist.pdf

1832	Wednesday, November 28, 2018, 13:38	Travis Cave	Conditioning Station	Standard Operation	TM4	UC#26	Module move
TM#4 with UC#26 has been moved from the south hot cell to the conditioning station.
1842	Wednesday, December 19, 2018, 14:41	Anders Mjos	Conditioning Station	Standard Operation		No target	Installed Shield Block on TCS
Frank and Anders installed lid on TCS and started vacuum system yesterday. To run over the Holidays. Retrieved dose badge from operational storage area. Measured field to be ~ 10 mSv/h at ~9am. Beam went off about 8:30am.
1843	Wednesday, January 02, 2019, 10:26	Anders Mjos	Conditioning Station	Standard Operation			Restarrted TP1S
Found pumps off after the holidays. Restarted roughing pump and TP1S
1849	Wednesday, January 09, 2019, 06:26	David Wang	Conditioning Station	Standard Operation			TCS vacuum pumps have been stopped.
The tCS will be vented soon for TM2 move later this week.
1853	Thursday, January 10, 2019, 09:26	Travis Cave	Conditioning Station	Standard Operation	TM2	no target	Module move
TM#2 has been moved from the south hot cell to the conditioning station.
1854	Thursday, January 10, 2019, 10:45	David Wang	Conditioning Station	Standard Operation	TM2		TM2 is under vacum at TCS.
TCS: TP1, TP2 and TP1S are started.
1856	Friday, January 11, 2019, 13:17	David Wang	Conditioning Station	Standard Operation	TM2		TCS and TM2 vacuum system are switched off for this Sunday power outage.
I will restart all pumps Monday morning.
1858	Monday, January 14, 2019, 07:07	David Wang	Conditioning Station	Maintenance	TM2		Restarted TCS vacuum system .
No issue.
1863	Monday, January 28, 2019, 10:41	David Wang	Conditioning Station	Repair	TM2		TM2 water lines helium pressure test at TCS
leak detector base LR: 0.0Xe-9atm.cc/sec. helium 70 psi. test time : 3 minutes for each circuit.The results in atm.cc/sec are Ta+(A):1.8 XE-8. TA-(B):0.0xE-9. Tu-(C):1.2XE-7. TU+(D):1.6XE-7. Coil 2 (PQ):0.0XE-9. Coil 1 (RU):0.0XE-9. MSP:2.2XE-7. EE:1.0XE-7. HS:N/A. Window:5.8XE-9
1866	Thursday, February 14, 2019, 07:13	David Wang	Conditioning Station	Standard Operation	TM2		TCS vacuum pumps have been stopped.
Preparation on TM2 move from TCS to SHC.
1877	Tuesday, February 26, 2019, 10:33	Travis Cave	Conditioning Station	Standard Operation	TM2	no target	Module move
TM#2 with no source tray has been moved from the south hot cell to the conditioning station.
1878	Friday, March 01, 2019, 08:42	Anders Mjos	Conditioning Station	Standard Operation	TM2		Conditioning TM2 without source tray
BIAS and EZL connected. No water flowing into the module (water looped on top of module) Friday, March 01, 2019, 08:20: 10kV Friday, March 01, 2019, 08:40: 20kV Friday, March 01, 2019, 08:57: 30kV Friday, March 01, 2019, 11:00: 40kV Friday, March 01, 2019, 15:23: 50kV Monday, March 04, 2019, 08:50: 50kV Monday, March 04, 2019, 09:22: 52.5kV Monday, March 04, 2019, 10:01: Spark tripped TPs at 54kV Monday, March 04, 2019, 10:04: 50kV Monday, March 04, 2019, 10:14: Multiple sparks at 54kV. Lowered to 30kV to stop. Monday, March 04, 2019, 10:15: 40kV Monday, March 04, 2019, 10:16: Sparking at 42kV. Lowered to 40kV Monday, March 04, 2019, 10:19: 42kV Monday, March 04, 2019, 10:48: 50kV Monday, March 04, 2019, 11:11: 52.5kV Monday, March 04, 2019, 11:25: 54kV Monday, March 04, 2019, 11:50: 55kV Monday, March 04, 2019, 13:33: 3 sparks observed for the last 1.5h Removed HV cover to avoid sparking between F/T and cover. Monday, March 04, 2019, 14:02:20kV Monday, March 04, 2019, 14:06: 50kV Monday, March 04, 2019, 14:12: 55kV Monday, March 04, 2019, 14:20: Multiple sparks at 56kV. Lowered to 30kV to stop. Monday, March 04, 2019, 14:27: 40kV Monday, March 04, 2019, 14:29: 50kV Monday, March 04, 2019, 14:32: 55kV Monday, March 04, 2019, 14:40: 56kV Monday, March 04, 2019, 14:55: Multiple sparks at 57kV. Lowered to 30kV to stop Monday, March 04, 2019, 15:01: 55kV Monday, March 04, 2019, 15:36: 57kV Monday, March 04, 2019, 15:51: 57.5kV Monday, March 04, 2019, 16:30: ~1 spark in 0.5h, somewhat unstable current (see attached Word file) Monday, March 04, 2019, 16:30: HV off
Attachment 1: TM2_BIAS_current_vs_voltage_2019-03.xlsx
Attachment 2: TM2_HV_Conditioning_2019-03-01.docx
1881	Tuesday, March 05, 2019, 07:20	David Wang	Conditioning Station	Repair	TM2		TM2 HV test at TCS
Spark between HV cover vertical mesh plate and HS 60KV bias connecting clamp 90degree angle at 55 KV on TM2 top. HV cover is removed to test above 55KV. The spark triggered TH and SHC ventilation secondary alarm.

Goto page Previous 1, 2, 3 ... 131, 132, 133 ... 138, 139, 140 Next

ELOG V2.9.2-2455