| ID |
Date |
Author |
Category |
Type |
Module |
Target/Number |
Subject |
Text |
 |
|
2817
|
Wednesday, June 18, 2025, 11:32 |
Aaron Tam | North Hot-Cell | Standard Operation | TM4 | C#5 SIS | C#5 Installation | June 17, 2025 - Aaron Tam, Brady Borrmann,
David Wang
Target handover 8:30am |
9x |
|
2816
|
Wednesday, June 18, 2025, 11:23 |
Aaron Tam | North Hot-Cell | Standard Operation | TM4 | UC#48 | UC#48 Removal from TM4 & PIE | June 17th, 2025 - Aaron Tam, Brady
Borrmann, David Wang, Travis Cave
UC#48 Removal 10:20am - 11:35am |
14x |
|
2815
|
Wednesday, June 18, 2025, 09:28 |
Travis Cave | Conditioning Station | Standard Operation | TM4 | C#5 | Module move | TM#4 with C#5 moved from the NHC
to the conditioning station. |
|
|
2814
|
Tuesday, June 17, 2025, 12:59 |
Frank Song | North Hot-Cell | Standard Operation | TM4 | C#5 | electrical check/leak check | TM4 with new target number C#5 installed
had been leak/electric checked on NHC flange
in TH. see pic attached with pls. |
|
|
2813
|
Tuesday, June 17, 2025, 11:58 |
Frank Song | ITE | Standard Operation | TM4 | UC#48 | module disconnection | TM4 with spent target UC#48 was disconnected
ang moved from ITE to NHC. see attachment
pls. |
|
|
2812
|
Tuesday, June 17, 2025, 11:32 |
Adam Newsome | North Hot-Cell | Standard Operation | TM4 | UC#48 | Module move | TM#4 with UC#48 was moved from the East
target station to the North Hot Cell for
target exchange. |
|
|
2811
|
Friday, June 13, 2025, 09:32 |
chad fisher | South Hot-Cell | Maintenance | | | Quarter century clean up | Thursday June 12th two 55 gal drums filled
with waste from the SHC. 1 drum with metal
waste, 1 with mostly air hoses. Pre-filter |
|
|
2810
|
Tuesday, June 10, 2025, 11:50 |
Frank Song | 5 Shielding Blocks | Standard Operation | | | shielding blocks transfer | 5 shielding blocks on ITE have been transferred
to ITW. |
|
|
2809
|
Friday, June 06, 2025, 08:36 |
David Wang | Crane | Maintenance | | | TH crane main hoist B starting delay issue appears again. | TH crane main hoist B starting delay issue
appears again this Thursday. It is about
1 minute waiting time after power on the |
|
|
2808
|
Friday, May 23, 2025, 13:12 |
chad fisher | Manipulator Maintenance | Repair | | | SHC West manipulator tong cable replacement | Broken tong cable on West manipulator (serial
#8106) replaced.
Wrist joint with broken cable was |
|
|
2807
|
Friday, May 16, 2025, 10:36 |
Frank Song | ITW | Standard Operation | TM2 | UC#49 | Module Connection | TM2 with UC#49 Febiad is connected
in ITW. Form attached. |
|
|
2806
|
Wednesday, May 14, 2025, 09:45 |
Frank Song | 5 Shielding Blocks | Standard Operation | TM4 | UC#48 IGLIS | shielding blocks transfer | 5 shielding blocks have been transferred
to ITE from storage area, the WP#I2025-05-14-2. |
|
|
2805
|
Tuesday, May 13, 2025, 13:13 |
Frank Song | MAA | Repair | | | Swap out the target hall alpha CAM. | AlphaCAM has been replaced and tested by
RPG in MAA target hall. (per Document-154779)
WorkPermit # I2025-05-13-3 |
|
|
2804
|
Tuesday, May 13, 2025, 13:12 |
Frank Song | MAA | Repair | | | Swap out the target hall alpha CAM. |
|
|
|
2803
|
Monday, May 12, 2025, 09:17 |
David Wang | Facilities | Standard Operation | | | BL2A MAA ASU Test | MCR Travis Curucz , Frank, and I finished
BL2A MAA ASU test per document 154779. everything
works fine. Travis kept the test document. |
|
|
2802
|
Wednesday, May 07, 2025, 13:41 |
Aaron Tam | North Hot-Cell | Standard Operation | TM2 | UC#49 | UC#49 SIS w/ Gasline Install | May 7th, 2025 - Aaron Schmidt, Aaron Tam
UC#49 Handover - good |
|
|
2801
|
Tuesday, May 06, 2025, 14:40 |
Frank Song | North Hot-Cell | Standard Operation | TM2 | UC#49 | electrical check/leak check | TM2 with new target UC#49 installed
is E/L checked on the flange of NHC in TH.
see attachment for detail. |
|
|
2800
|
Tuesday, May 06, 2025, 09:18 |
Frank Song | ITE | Standard Operation | TM4 | UCx#48 | Module Connection | TM4 with first target UC#48 of this
year has been connected in ITE. see attachment
please. |
|
|
2799
|
Monday, May 05, 2025, 09:18 |
chad fisher | North Hot-Cell | Maintenance | | | Manipulator Remote End Replacement 9352 with 9764 | Remote end 9352 replaced with end 9764
due to signs of an issue with the tong cable
(tong opening excessively large and slack |
|
|
2798
|
Friday, May 02, 2025, 10:16 |
Aaron Tam | North Hot-Cell | Maintenance | | | NHC Window Oil Fill | Findings
During April 2025 safety
walk ID: 2796 , it was noted that the |
12x |