Electrical check of TM#2 after the insulator change on thursday september 21.

Electrical check of TM#2 with Ta#54 at the south hot cell. See attached PDF for details.

 TM#2 with Ta#54 has been moved from the south hot cell to the conditioning station.

The spent Ta#53 has been moved to the spent target vault. See attached file for details.

 TM#2 with Ta#54 has been moved from the conditioning station to the west target station.

 Field measurements were taken of the old source trays. The old TM#2 source tray had a minimum field value of 0.50 mSv/hr and a maximum of 1.18 mSv/hr through 360 deg of rotation. The box was rotated around three times and put back in the vault. TM#1 old source tray was also removed and measured as well the field values for it were a minimum of 0.52 mSv/hr and a maximum of 1.15 mSv/hr through 360 deg of rotation. The box was rotated around three times and placed back in the vault. In both cases the box was roughly one metre from the radiation monitor.   

 TM#4 with UC#21 has been moved from the east target station to the south hot cell.

 The results of the electrical check of TM#4 with SiC#37, see attached PDF.

 TM#4 with SiC#37 has been moved from the south hot cell to the conditioning station.

The spent UC#21 has been moved from the south hot cell to the spent target vault. See attached for details

 TM#4 with SiC#37 has been moved from the conditioning station to the east target station. A measurement was taken on TM#4 as it was being removed from the conditioning station, the location was on the side of the service tray access panel approx one metre away and the cover fully exposed, the reading was 750uSV/hr.

SiC#30,ZrC#7,Ta#44,TiC#4, and Ta#41 have been moved from the spent target storage to the mini storage. See attached PDF for details of the orders of the pails in the mini vault.

 TM#2 with Ta#54 has been moved from the west target station to the south hot cell.

 The results of the various electrical check done on the target module on November 7th and 8th of 2017. Checks were done with the old Ta#54 target without a target and finally with the new Ta#55 target. See the attached PDF for results.

 The spent Ta#54 target has been moved from the south hot cell to the spent target vault. It was placed in Pail #157 and put in spot #5B of the vault.

 TM#2 with Ta#55 has been moved from the conditioning station to the west target station. The field was measured on the access panel to the service chase and the field was found to be 430uSv/hr at one meter from the module.

 The spent target assay was aborted today after the first target was finished due to the very old computer that controls the camera and the vault door effectively died. The vault door had to be closed using the emergency door closing winch which worked so it passed that test.

 All targets in the ISAC Spent Target Vault have been either assayed and had field measurement done on them or just measurement if to hot to assay.

 TM#2 with Ta#55 has been moved from the west target station to the south hot cell.

 TM#2 has been moved from the south hot cell to the south west silo.