TM#4 with UC#21 has been moved from the conditioning station to the east target station.

 TM#3 has been moved from the north east silo to the conditioning station.

 TM#3 has been moved back to the silo from the conditioning station.

 TM#2 with Ta#53 has been moved from the west target station to the south hot cell.

 TM#2 with Ta#54 has been moved from the south hot cell to the conditioning station.

 TM#2 with Ta#54 has been moved from the conditioning station to the west target station.

 TM#4 with UC#21 has been moved from the east target station to the south hot cell.

 TM#4 with SiC#37 has been moved from the south hot cell to the conditioning station.

 TM#4 with SiC#37 has been moved from the conditioning station to the east target station. A measurement was taken on TM#4 as it was being removed from the conditioning station, the location was on the side of the service tray access panel approx one metre away and the cover fully exposed, the reading was 750uSV/hr.

 TM#2 with Ta#54 has been moved from the west target station to the south hot cell.

 TM#2 with Ta#55 has been moved from the conditioning station to the west target station. The field was measured on the access panel to the service chase and the field was found to be 430uSv/hr at one meter from the module.

 TM#2 with Ta#55 has been moved from the west target station to the south hot cell.

 TM#2 has been moved from the south hot cell to the south west silo.

 TM#4 with SiC#37 has been moved from the East Target Station to the South Hot cell.

 TM#4 was moved to the conditioning station from the south hot cell. The module was moved with out the containment box.

 TM#4 with no target and no containment box has been moved from the conditioning station to the south hot cell.

TM#2 has been moved from the south hot cell to the conditioning station.

 TM#4 ,with UC#22, was moved from the south hot cell to the east target station. Upon lowering the module down it made contact with the IMC, At that point the module was removed and placed back in the south hot cell. The IMC was inspected and problem corrected and the module was moved back to the east target station without a problem.

Travis Cave wrote:

TM#4 ,with UC#22, was moved from the south hot cell to the east target station. Upon lowering the module down it made contact with the IMC, At that point the module was removed and placed back in the south hot cell. The IMC was inspected and problem corrected and the module was moved back to the east target station without a problem.

 The IMC (ITA0160) appears to have a dent in it from the contact with the Target Module. The pressure on the IMC was found to be about negative ~3 mmHg and was increased to ~20 mmHg to attempt to retract the IMC further away from the TM. This pressure is similar to the pressure used at the Conditioning Station. The bellows appears not to be symmetrically compressed. It should be inspected again and pressure checked and monitored for upcoming module moves.

 TM#2 has been moved from the conditioning station to the south hot cell.