| ID |
Date |
Author |
Category |
Type |
Module |
Target/Number |
Subject |
|
2732
|
Wednesday, December 04, 2024, 14:30 |
Aaron Tam | South Hot-Cell | Standard Operation | | Ta#68 | Ta#68 PIE |
Abstract:
This target has seen some irregular beam patterns
Possibility that the beam hit the walls of the target tube or even the cooling fins
This PIE we want to investigate how the irregular beam physically affected the target
Related ELOGS:
ID: 2728
ID: 2698
PIE was performed by Aaron Tam, Directed by Aurelia Laxdal, Observed by Lucas Backes, Special help from Chad Fisher
External views:
- Windows are clear of any irregularities
- More pictures of this can be found in RH-ISAC E-log 2728
Internal Views:
- Heatshield internal
- Some discolouration from heat and soot deposits.
- This seems to be fairly clean to normal amounts - not concerning
- Target tube
- tube is bent with the middle higher than the sides
- Target tube was not removed 9/64ths allen wrench could not be located for this operation
- Target tube Exit
- Heatshield windows were punctured to reveal the target tube entraces/exits
- Entrance is waterline side (ITE)
- Extraction electrode parts were removed from the back off the target
- These parts look normal
- some of the extraction electrode would not pull out due to tight fitting parts and the investigation stopped here.
Conclusion: Target physical condition is normal as far as we could investigate |
| Attachment 1: Waterline_disconnect.jpg
|
|
| Attachment 2: Heatshield_inside.jpg
|
|
| Attachment 3: Target_tube_first_look.jpg
|
|
| Attachment 4: Heatshield2.jpg
|
|
| Attachment 5: Heatshield3.jpg
|
|
| Attachment 6: Target_tube_2.jpg
|
|
| Attachment 7: Target_tube_3.jpg
|
|
| Attachment 8: Couldn't_undo_this_bolt.jpg
|
|
| Attachment 9: Exit_tube.jpg
|
|
| Attachment 10: Exit_tube2.jpg
|
|
| Attachment 11: Exit_tube3.jpg
|
|
| Attachment 12: Exit_tube4.jpg
|
|
| Attachment 13: Exit_tube5.jpg
|
|
| Attachment 14: Exit_tube6.jpg
|
|
| Attachment 15: Exit_tube7.jpg
|
|
| Attachment 16: Exit_tube8.jpg
|
|
| Attachment 17: Exit_tube9.jpg
|
|
| Attachment 18: Exit_tube10.jpg
|
|
| Attachment 19: entrance_tube.jpg
|
|
| Attachment 20: entrance_tube2.jpg
|
|
| Attachment 21: entrance_tube3.jpg
|
|
| Attachment 22: entrance_tube4.jpg
|
|
| Attachment 23: Exit_tube5.jpg
|
|
| Attachment 24: entrance_tube6.jpg
|
|
| Attachment 25: entrance_tube7.jpg
|
|
| Attachment 26: entrance_tube8.jpg
|
|
| Attachment 27: entrance_tube9.jpg
|
|
| Attachment 28: entrance_tube10.jpg
|
|
| Attachment 29: entrance_tube11.jpg
|
|
| Attachment 30: Extraction_electrode.jpg
|
|
| Attachment 31: entrance_tube1.jpg
|
|
| Attachment 32: Extraction_electrode2.jpg
|
|
|
2733
|
Thursday, December 05, 2024, 11:43 |
Aaron Tam | South Hot-Cell | Standard Operation | | Ta#68 | Pail loading - Ta#68 & Others into Pail#300 |
December 5, 2024 - Aaron Tam w/ help from Chad, Peter and Adam at the Crane
Hot Cell Prep:
- Tools organized, working space cleared, spot for clean tool to sit placed, Air tool is open and spinning clockwise for tightening
Loading:
- Ta#68 was loaded into pail# 300
- PEEK seal parasitic assemblies loaded (PEEK seals were removed in ID: 2724)
- Farran had some old samples that also went in (More details to come when Farran sends the info)
Lid/latching:
Bail attachment:
- Some difficulty in attaching the Lifting Bail, but went on smoothly with the help of Chad
Notes:
- One of the PEEK seal parasitic Target assembly lids was missed in the loading. This will have to be loaded next time.
- All parasitic type targets remain in the yellow container shown in photos below.
|
| Attachment 1: Pail_Landing.jpg
|
|
| Attachment 2: Loaded_Pail.jpg
|
|
| Attachment 3: Parasitic_Lid_that_was_missed.jpg
|
|
| Attachment 4: Location_of_all_parasitic_type_targets_and_fasteners.jpg
|
|
| Attachment 5: Parastics_and_Target_stuff_that_went_inside_this_pail.jpg
|
|
|
1897
|
Monday, March 25, 2019, 10:11 |
Aaron Schmidt | South Hot-Cell | Repair | TM2 | | LP-FEBIAD Test Target (empty) |
Link to previous target information: https://elog.triumf.ca/TIS/RH-ISAC/1039
Monday, March 25, 2019, 10:00: Target electrical checks (See Attachment 1)
Tested for TM2 |
| Attachment 1: TM2_-_FEBIAD_target_-_Electrical_Test.pdf
|
|
|
2530
|
Thursday, January 25, 2024, 07:24 |
David Wang | Crane | Standard Operation | | | targe hall annual crane inspection |
Tom Kauss finished TH crane annual inspection yesterday. The crane woks fine. Tom has this inspection record in his file. The crane inspection tag has been issued for 2024. |