ELOG General

OLIS Logbook General

General, Page 24 of 26

Not logged in

Full | Summary | Threaded

513 Entries

Goto page Previous 1, 2, 3 ... 23, 24, 25, 26 Next

ID	Date	Author	Type	Category	Subject	Text
214	Fri Dec 18 13:14:01 2009	Damien Gallop			OLIS development for CUSP source continued	Yesterday: Busy! Source filment changed last night. Source pumped overnight. First start this morning.	9x
188	Wed Nov 18 23:46:14 2009	Keerthi Jayamanna			OLIS development started	All turbos in the OLIS and MCIS are off. No controls for the MCIS. Pumps switched of by pulling the CG cable.
220	Wed Jan 13 18:16:22 2010	Damien Gallop			OLIS development with MWS at 28keV	We will be delivering a 28keV beam to the tuning boys tomorrow for further diagnosis of the 8pi line. In anticipation, I restarted	6x
387	Wed Feb 23 22:29:48 2011	Keerthi Jayamanna			OLIS mahnet	Klixon at the OLIS bemding magnet is not funtioning properly.
150	Sun Oct 4 19:16:46 2009	Keerthi			OLIS status	Supernanogan is ready with 22Ne+4 for upcoming CSB run. EL, HV and RF are on. The anlyzing magnet and the other optics are set for A/Q=5.5.
164	Thu Oct 15 21:06:10 2009	Keerthi			OLIS status	33S development is completed. A 3nA of 33S+5 can be produced with 10W of RF power and 2.5mm aperture.
264	Fri May 7 19:10:05 2010	Keerthi Jayamanna	Routine	General	OLIS status	MW source is back and running. A new vacuum chamber is added to the Supernanogan RF block. SO2 is not filled in yet.
230	Thu Mar 11 23:02:18 2010	Keerthi			OLIS status after shutdown	Microwave source is up and running. Supernanogan: grounding rod is stuck, RF generator does not clear the interlocks
479	Fri May 16 08:44:27 2014	Raymond Dubé	Routine	General	OLIS work next week	Attached is the scheduled work for OLIS next week.
42	Fri Jul 3 10:03:11 2009	Damien Gallop	Routine	General	Overnight beam stability on FC3	Here are some pics and data from total MCIS beam on FC3 overnight. A bit inconclusive, but there may be a temperature correlation.
173	Wed Oct 28 09:55:28 2009	Damien Gallop			Planned IOSIOC reboot	Controls is rebooting IOSIOC. I have inserted MCIS:FC1 for the duration. Let's see what comes of it all.
28	Mon Jun 22 20:28:37 2009	Damien Gallop	Routine	General	Preparations for 16O2+ delivery	In anticipation of 16O2+ delivery mid-week, we checked 16O2+ production from the Supernanogan source. No problem. We did have to use the	6x
41	Thu Jul 2 16:55:04 2009	Damien Gallop	Routine	General	RF frequency scans versus each charge state of 16O	Let's take a look at varying frequency versus beam current for 16O2+. Starting RF values shown below. FC6 = 1.09enA.	7x
43	Fri Jul 3 10:29:15 2009	Damien Gallop	Routine	General	RF frequency scans versus each charge state of 16O cont'd.	16O2+ beam on FC6 = 10nA as before. Move to 16O3+ A/q = 5.33... A frequency scan between 13 &
509	Wed Apr 29 07:48:22 2015	Brian Minato	Other	Other	Repair- Water leak inside HV cage	A water leak was reported inside the HV cage (FR#8079). The cage was accessed to determine the source of the leak (WP#I2015-04-27-1).
501	Thu Nov 13 16:31:54 2014	Brian Minato	Other	Other	SIS	A new SIS source has been installed. The oven has been loaded with Sodium Hydrogen Carbonate (Alfa Aesar 10863) and Rubidium
513	Wed Feb 22 21:51:40 2017	Keerthi Jayamanna			SIS first beam is N1+1	Chris confirmed the first SIS beam would be Na+1. Next Rb+1 and then Li+1
469	Sun Dec 2 22:32:19 2012	Keerthi Jayamanna	Routine	General	Still cannot write anything other than Subject
26	Fri Jun 19 20:15:19 2009	Damien Gallop	Routine	General	Summary of 16On+ emittance scans	Here is a list of 16On+ emittance scans for today. Although IOSIOC got rebooted, restored tune was identical and trouble-free,
493	Thu Oct 30 22:09:02 2014	Keerthi Jayamanna			Suoernanogan steering	IOS mass scan does not work. A/Q FC6

Goto page Previous 1, 2, 3 ... 23, 24, 25, 26 Next

ELOG V2.9.2-2455