Nikita Bernier wrote:

Wednesday, June 20, 2012, 17:23 New Target boat, with no coating, wrapped with a 0.002 inches thick Ta foil, contains NiO D-shape discs : Sample,   # Disks,    Mass (g),    Thickness (mm) 1    12,  1.9396,  1.938 2    13,  0.9592,  0.847 3    25,  2.6675,  3.06 See John's Ipad for their recipes. Evaporator #2 is now auto-ramping overnight at 0.5 A/min, up to 580 A, with the maximum voltage limited at 14 V, between 3.00e-05 (Good vacuum) and 4.00e-05 Torr (Bad vacuum).

Wednesday, June 20, 2012, 22:28

TGHT tripped off at 78A due to high out-gassing pressure.  The current was tapped down to 75A before it was turned back on. 

Changed ramping rate from 0.5A/min to 0.2A/min.  

Initiate auto-ramping... 

 Thursday, June 21, 2012, 08:35

Vacuum has come down to 7e-7 as TGHT is being ramped up at 0.2A/min. (see attachment#1).

Increase TGHT rate to 2A/min.

The temperature should be measured when the heater gets up to around 500A.