|
Logbooks
Lab Maintenance
Evaporator_1
Evaporator_2
Laser cutter
Target Production
Test-Stand
RH-ISAC
RH-Cyclotron
RH-Meson Hall
RH-Beamlines
RH-ARIEL
|
| Evaporator_2 |
Not logged in |
 |
|
|
 Thursday, October 02, 2014, 11:26, John Wong, Empty, , , Maintenance, Broken insulators
|
 Friday, October 03, 2014, 13:02, Anders Mjos, Empty, , , Maintenance, Broken insulators 
|
|
|
Message ID: 161
Entry time: Friday, October 03, 2014, 13:02
In reply to: 159
|
| Author: |
Anders Mjos |
| Target Material: |
Empty |
| Target Oven W.O#: |
|
| Source: |
|
| Status: |
Maintenance |
| Subject: |
Broken insulators |
|
|
| John Wong wrote: |
|
Thursday, October 02, 2014, 11:22
It was found that after the last process, Evap#2 has broken insulators - the cylinder insulator that supports the target centre legs and the block insulator that supports the terminals.
Informed Anders/Rick.
|
Friday, October 03, 2014
- Insulators replaced. Torque 55 in lbs on all fasteners.
- Cleaned TGHT terminals with scotch-brite and methanol.
- New (clean) heat shield prepared WO-39230-2.
- Re-installed right side heat shield alignment pin (previously removed to allow line of sight to the target).
|
|
|