|
Logbooks
Lab Maintenance
Evaporator_1
Evaporator_2
Laser cutter
Target Production
Test-Stand
RH-ISAC
RH-Cyclotron
RH-Meson Hall
RH-Beamlines
RH-ARIEL
|
| Evaporator_2 |
Not logged in |
 |
|
|
 Tuesday, August 05, 2014, 13:13, Laura Lambert, Empty, , TARGET BOAT, In progress, Sintering TaC coated end caps 
|
 Tuesday, August 05, 2014, 17:20, John Wong, , , TARGET BOAT, In progress, Sintering TaC coated end caps
| |
Thursday, August 07, 2014, 10:13, Laura Lambert, , , TARGET BOAT, Failed, Sintering TaC coated end caps
|
|
|
Message ID: 150
Entry time: Tuesday, August 05, 2014, 13:13
Reply to this: 151
|
| Author: |
Laura Lambert |
| Target Material: |
Empty |
| Target Oven W.O#: |
|
| Source: |
TARGET BOAT |
| Status: |
In progress |
| Subject: |
Sintering TaC coated end caps |
|
|
Tuesday, August 05, 2014, 12:02
The target container end caps were coated with TaC spray and let dry.
The caps are inserted in the target boat vertically, wrapped in graphite foil with 3 x Ta-heat shield. [see attached photo]
The chamber is currently being pumped down.
|
|