Marla Cervantes wrote:

Marla Cervantes wrote: Marla Cervantes wrote:  Friday, January 19, 2018, 12:29 Circles from cast 1 were used, the same as the last round of 1stepUCx [see elog i.d. 164] A 14mm punch was used to punch out circles from the cast. 35 circles were packed into a graphite sample container. 35 x UO2/C circles = 5.69 g Graphite container = 6.84 g Graphite container is placed inside a target boat. Boat previously coated with TaC and sintered. Ta-target boat is wrapped with 3-layers of heat shield and installed in Evap1. Chamber currently pumping down.    Monday, January 22, 2018, 9:00 A power outage on Sunday tripped off EVAP1.  Monday, January 22, 2018, 10:00 Chamber pumping down. Water flow turned on. Monday, January 22, 2018, 13:30 IGP1 = 8e-6 Torr Tapped up entire process manually to 520A in 45 min TGHT = 520 A, 6.08 V  Vacuum coming down indicating carbonization process complete Will remain at max setpoint overnight.

 Tuesday, January 23, 2018, 9:30

Initiating auto-cool at 2 A/min

 Tuesday, January 23, 2018, 16:00

 EVAP1 was not vented, Ar tank has low level, Ar tank will be replaced.

Wednesday, January 24, 2018, 11:37

 EVAP1 was vented very carefully using the Ar remaining in the Ar tank.

Ar tank remaining gas: ~8 psi.

Wednesday, January 24, 2018, 15:42 

UCx was transferred to glove box.

Final mass 4.501 g