Laura Lambert wrote:

Friday, October 17, 2014, 11:47 Target container was previously coated with TaC spray and sintered. It's is wrapped with 3 layers of Ta-heat shield, including the center block. The target consists of 255 discs of UCx with 10.5cm in length. A regular TaC coated endcap is inserted right, wrt the ionizer tube pointing down, so the left is open with a removable half-cap to allow out-gassing. The chamber was pumped down overnight. TGHT will be ramped up to 520A - keep heating the current for 4-5 hours. Parameter setup: 5.0e-5 good vac, 6.0e-5 bad vac. Auto ramp at 0.1A/min.  Friday, October 17, 2014, 13:25 IG1 = 2.6e-6 Torr Manually stepped up to 35A Waited ~1hr15 IG1 = 4.2e-6 Torr Initiating auto-ramp.

 Monday, October 20, 2014, 14:10

There were two big power bumps occurred on Saturday Oct 18 and wiped all the IOC/PLC on the Evaporators.   All the system, including TGHT/pumps/EPICS/Alarm handlers were found off.  The ion gauge was turned on this morning and showed the pressure was around 16mTorr. (see attachment).

The pump has been turned back on; pressure is currently at 3.5e-6 Torr.

Ramping up TGHT...

 Monday, November 03, 2014, 12:05

TGHT has reached to 580A and the target has conditioned at that current for about 3 days. 

Cooling down at 2A/min.

 Wednesday, November 05, 2014, 16:40

UCx conditioning complete.

Target is now in the Ar-glove box.  End caps are inserted but need to be expanded.

Need to insert Re foil prior to assembly.