 Tue Mar 29 15:32:08 2011, Damien Gallop, , , Controls and Panel MRO
|
Controls is working on an interlock issue. Electrical panel MCC-X maintenance is planned for tomorrow afternoon.
Loaned a Horiba SEC-7320 flow controller to Mel. This unit belongs to Friedhelm. |
|
Fri Mar 25 17:42:38 2011, Keerthi Jayamanna, , , OLIS HV start up
|
High Voltage cage is on at ~17:43pm
Interlock cleard and HV (10kV) is on at 17:53pm |
|
Wed Mar 9 11:09:02 2011, Keerthi Jayamanna, , , IOS:SSW failed
|
| IOS:SSW failed unexpectedly. No reason found. Came back on easily. |
|
Sat Feb 26 22:06:03 2011, Keerthi Jayamanna, , , Ti+7 status
|
| 90pA of Ti+7 is running smoothly. 22:05 Feb26th |
|
Fri Feb 25 17:27:11 2011, Keerthi Jayamanna, , , Titaniums efficiency test
|
Small peice of titanium wire is installed and running aroung 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
|
Fri Feb 25 17:27:11 2011, Keerthi Jayamanna, , , Titaniums efficiency test
|
Small piece of titanium foil 0.0005" thick is installed and running around 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
|
Wed Feb 23 22:29:48 2011, Keerthi Jayamanna, , , OLIS mahnet
|
| Klixon at the OLIS bemding magnet is not funtioning properly. |
|
Tue Feb 22 18:54:43 2011, Keerthi Jayamanna, , , EE and SSEE
|
| Both EE and SSEE problems were solved. They are working OK now. |
|
Tue Feb 22 18:52:53 2011, Keerthi Jayamanna, , , Ti+7 efficiency studies
|
| 2mm diameter Ti was installed to set the optics. Later 0.0005 in thick foil will be installed for real efficiency studies. |
|
Fri Feb 18 11:43:32 2011, Keerthi Jayamanna, , , IOS: EE Status
|
| IOS:EE found damaged. It has been replaced with IOS:SSEE-Michael B. |
|
Fri Feb 18 11:05:50 2011, Keerthi Jayamanna, , , OLIS Problems
|
| PE set point is ok but read back is half of the real value. |
|
Fri Dec 24 13:06:07 2010, Damien Gallop, , , Merry Christmas and Happy New Year
|
| Our very best to all of you. |
Tue Dec 21 09:43:22 2010, Damien Gallop, , , In Memoriam... Mike McDonald 
|
At 5:00 this morning, after a lengthy battle with cancer, Mike passed from this life to his eternal reward. He has left us a great legacy. May he rest
in peace. |
|
Mon Dec 20 09:50:07 2010, Damien Gallop, , , MCIS Development & EOB
|
Development and the quest for gold continue.
Later... Mass scans in region of 197Au33 A/q=5.97, with graph of all theoretically possible charge states in the same A/q region. The thing to
note in that last graph is how clean is the region (just left of A/q=6) where 197Au33 is predicted. |
|
Fri Dec 17 09:18:57 2010, Damien Gallop, , , MCIS Development
|
| Development continues in the search for gold. A=197 Present A/q=5.94, which suggests 197Au+33. It could also be a tail of 12C+2. We'll see. |
|
Wed Dec 15 09:18:41 2010, Damien Gallop, , , MCIS Development
|
| Source development in preparation for Au beam in progress. |
|
Tue Dec 14 09:15:58 2010, Damien Gallop, , , MCIS Development
|
Beam development started yesterday. Looks like the HERACLES run, which started Thursday,
ended yesterday morning. |
|
Tue Dec 7 08:57:26 2010, Damien Gallop, , , 80Kr14+/40Ar7+ for SEBT Development
|
| Development should continue today. Looks like Supernanogan went through a plasma mode change overnight and settled into a new mode. |
|
Mon Dec 6 09:08:52 2010, Damien Gallop, , , 80Kr14+/40Ar7+ for SEBT Development
|
The previous 12C2+ development run from the Supernanogan ended Friday morning. Starting Friday afternoon, the Supernanogan was prepared for an upcoming
SEBT development using krypton beams. The source was ready overnight.
There were some teething pains over the weekend. An A/q=5.71 beam is sitting on FC6 presently. The beam schedule shows an experiment change on Thursday |
|
Fri Dec 3 09:37:14 2010, Damien Gallop, , , 12C2+ for Commissioning 15x
|
Last moments of beam development for SEBT commissioning. Attached is an FC6 plot and the present optics and 1mm slits. Decision was to not do a vertical
emittance scan at this time, but proceed with 15Kr development, up next. Before we shut off, one last emittance scan coming up.
Later... Emittance scan with 2.5mm slits (default position setting used) in progress... Done. 101203_1017ILTEMIT.txt. |