| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
485
|
Tue Oct 14 08:31:53 2014 |
Brian Minato | Other | General | Water Flow Switch #3 | This entry was incorrectly added to the
OLIS logbook. it has been moved to
the I3 logbook. |
|
|
158
|
Sun Oct 11 17:09:52 2009 |
Keerthi | | | Vacuum with IOS:IV7 | IOS:IG4 reads 1.25 e-7 Torr and IOS:IG1
reads 9.8e-8 Torr with IOS:IV7 is open
IOS:IG4 reads 8.35 e-8 Torr and IOS:IG1 |
|
|
389
|
Fri Feb 25 17:27:11 2011 |
Keerthi Jayamanna | | | Titaniums efficiency test | Small peice of titanium wire is installed
and running aroung 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
|
|
388
|
Fri Feb 25 17:27:11 2011 |
Keerthi Jayamanna | | | Titaniums efficiency test | Small piece of titanium foil 0.0005"
thick is installed and running around 100pA
of Ti+7 at FC6. |
|
|
390
|
Sat Feb 26 22:06:03 2011 |
Keerthi Jayamanna | | | Ti+7 status | 90pA of Ti+7 is running smoothly. 22:05
Feb26th |
|
|
385
|
Tue Feb 22 18:52:53 2011 |
Keerthi Jayamanna | | | Ti+7 efficiency studies | 2mm diameter Ti was installed to set the
optics. Later 0.0005 in thick foil will be
installed for real efficiency studies. |
|
|
2
|
Thu May 14 12:02:09 2009 |
Damien Gallop | Routine | General | Testing 2 | My first OLIS elog entry. |
|
|
484
|
Fri Oct 10 14:02:56 2014 |
Raymond Dube | Routine | General | Test with new Alga, ALPA 50W RF AMP | We did a test yesterday with the new Alga
Microwave RF AMP, model # ALPA 50 Watt, serial
# 130684 to be used for the MCIS. We |
|
|
144
|
Wed Sep 16 18:14:29 2009 |
Damien Gallop | | | Test scans for publication 2 | 090916_1206ILTEMIT.txt
Graphics with "color" in
the filename will look in print the same |
19x |
|
137
|
Tue Sep 15 16:56:03 2009 |
Damien Gallop | | | Test scans for publication | Here are pix of the same scan: original,
then greyscale, then cropped, using The GIMP.
Not bad. |
|
|
1
|
Thu May 14 11:07:33 2009 |
Hossein Rafighi | | | Test | Testing! |
|
|
6
|
Fri May 22 12:31:36 2009 |
Raymond Dubé | | | Test | Hello world |
|
|
7
|
Fri May 22 15:03:55 2009 |
Damien Gallop | Routine | General | Temporary fix on IOS:TP7 | Vacuum Group applied a temporary fix to
the lower body seal on IOS:TP7, which we
found last night to be leaking. Edi tells |
|
|
16
|
Thu Jun 11 12:10:22 2009 |
Damien Gallop | Routine | General | Supernanogan status | Pumping went well overnight. TP3 turned
on around noon. Issues with Kepco communications. |
|
|
222
|
Fri Jan 15 15:30:02 2010 |
keerthi | | | Supernanogan oven start up | Voltage
Current
MCIC:IG1 |
|
|
99
|
Fri Jul 17 09:33:09 2009 |
Damien Gallop | | | Supernanogan epilogue | There are the last couple of hours of Supernanogan
Development for this set. Our run plan included
17On+ studies. Time will not permit it this |
|
|
138
|
Tue Sep 15 19:46:21 2009 |
Keerthi | Routine | General | Supernanogan emittance scans | 090915_1915ILTEMIT.txt = 17O +3, 4.4uA
new tune, scanner offset +10V, scanner
scale 100nA , 100x50 matrix |
9x |
|
223
|
Tue Feb 2 10:06:41 2010 |
Damien Gallop | | | Supernanogan development wind-up | We ran 32S5+ overnight. Keerthi has been
working with the new surface source oven
for the last couple of weeks. His results |
9x |
|
51
|
Wed Jul 8 11:52:54 2009 |
Damien Gallop | Routine | General | Supernanogan development run plan for the remainder of this set | * 18On+ emittance scans at present ion
source settings: complete today.
* 18On+ frequency measurements: Thursday. |
|
|
13
|
Wed Jun 10 11:22:59 2009 |
Damien Gallop | Routine | General | Supernanogan development mass scans | Main event this morning so far: mass scans
and post-scan analysis using Gabe's tools.
We have a pretty good recipe now. Tight scan |
|