Tuda logbooks General E1104 ISACII E1195 E1103 E1147 S1287 S1203 S1233 S1284 S1447 23Na(a,p) S1540 S1381  S1847 Catania
  S1287  ELOG logo
 List  |  New  |  Edit  |  Delete  |  Reply  |  Duplicate  |  Find  |  Config  |  Help 
Entry  Wed May 11 17:59:12 2011, JB, , , Re-entrant flange alignment 
    Reply  Thu May 12 03:04:44 2011, Tom Davinson, , , Re: Re-entrant flange alignment 
Message ID: 19     Entry time: Thu May 12 03:04:44 2011     In reply to: 18
Author: Tom Davinson 
Type:  
Category:  
Subject: Re: Re-entrant flange alignment  
> Alignments checks revealed that downstream end of
> TUDA was ~1mm off (can't remember which way).

Was the downstream flange bolted into position?
ELOG V2.9.2-2455