Tuda logbooks General E1104 ISACII E1195 E1103 E1147 S1287 S1203 S1233 S1284 S1447 23Na(a,p) S1540 S1381  S1847 Catania

S1203

Fields marked with * are required Entry time: Thu Nov 14 20:28:00 2024 Author*: Type: - please select - Routine Other Category: - please select - General Other Subject: <p>Beamrate (scintillator) - 2592 <br /> Accepted Trigger - 7<br /> Trigger - 7</p> <p>&nbsp;</p> <p><u>Minutes from the Shift</u></p> <p>18:15 - Lithium beam went down for approximately 6 minutes at about this time. After the beam was reestablished the control room quickly performed a calibration. This can be seen in the data by the re-emergence of the detected proton beam prior to the scintillator detecting any lithium-11.</p> <p>20:10 - A run that had begun at 18:51 was stopped by R. Kanungo to see if the data collection for the delta-E detector could be improved. Counts for delta-E were low. (note from R. Kanungo to be attached)</p> <p>21:53 - The control room called to say that a cavity had 'dropped out'. This issue was resolved and a new run began however counts were not taken from the short run which had started at 21:47.</p> <p>22:22 -&nbsp; The StripTool Graph on the EpicsPC recorded an abnormally stable lithium-11 beam intensity and proton beam current (zero fluctuation)&nbsp; for approximately 5 minutes. However, during this time CAEN readouts from the scintillator on Tuda 3 continued to fluctuate suggesting the issue is with EpicsPC or StripTool.</p> <p><u>Leakage Currents</u></p> <p>DE0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.06</p> <p>E3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.25</p> <p>DE2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.08</p> <p>E5&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.31</p> <p>DE4&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.03</p> <p>E7&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.47</p> <p>DE6&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.05</p> <p>E2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.52</p> <p>UP 0&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.05</p> <p>UP 1&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.04</p> <p>UP 2&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.04</p> <p>UP 3&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.00</p> <p>UP 4&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.01</p> <p>UP 5&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.06</p> <p>UP 6&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.09</p> <p>UP 7&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; 0.23</p> <p>S2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp; 0.91</p> <p><u>Other Issues</u></p> <p>A quick run-through of the channels showed that channels 19 and 32 on UP 1 (adc 11) are probably broken.</p> Encoding: HTML   ELCode   plain   Suppress Email notification Attachment 1:

ELOG V2.9.2-2455