Tuda logbooks
General
E1104
ISACII
E1195
E1103
E1147
S1287
S1203
S1233
S1284
S1447 23Na(a,p)
S1540
S1381
S1847 Catania
S1203
Fields marked with
*
are required
Entry time:
Fri Jun 10 07:13:58 2011
Author
*
:
Type:
- please select -
Routine
Other
Category:
- please select -
General
Other
Subject:
<p>Beamrate (scintillator) - 0<br /> Accepted Trigger - 0<br /> Trigger - 3</p> <p> </p> <p><u>Run Summaries</u></p> <p>372 - Ran for approximately 2 hours. Aside from a peculiar dip in beam intensity at ~00:25 the run was fine.</p> <p>373 - Ran for about 1 hour 18 minutes. Lithium-11 beam had been down for more than 10mins so the run was stopped.</p> <p>374 - Beam ran for about 56 minutes. A spike in the pressure was observed at 2:54. The intensity of the beam flatlined at 2:58, however prior experience leads me to believe this was likely the fault of EPICS. Beam intensity fell to zero at 3:03 for a short time. Another spike in the pressure was observed at 3:19. The problem with the beamline is allegedly relating to a coil in one of the cavities.</p> <p>375 - Beam ran for 9 minutes before failing.</p> <p>376 - With the cavity tripped, no lithium-11 was present. However, data was taken to observe background effects. This was done for about 25 minutes.</p> <p>378 - Another background run was done for about 2 hours this time.</p> <p><u>Leakage Currents</u></p> <p>DE0 - 0.06</p> <p>E3 - 0.25</p> <p>DE2 - 0.09</p> <p>E5 - 0.31</p> <p>DE4 - 0.02</p> <p>E7 - 0.44</p> <p>DE6 - 0.05</p> <p>E2 - 0.49</p> <p>UP 0 - 0.05</p> <p>UP 1 - 0.04</p> <p>UP 2 - 0.01</p> <p>UP 3 - 0.00</p> <p>UP 4 - 0.01 (fluctuating as high as 0.43)</p> <p>UP 5 - 0.06</p> <p>UP 6 - 0.09</p> <p>UP 7 - 0.23</p> <p>S2 - 0.91</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
ELOG V2.9.2-2455