Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL
  Test-Stand  Not logged in ELOG logo
 List 
Message ID: 768     Entry time: Thursday, October 31, 2019, 13:22
Author: Fernando Maldonado 
Target/No.#:  
Source:  
Station:  
Module:  
Target Oven W.O#:  
Heat Shield W.O#:  
Status: Problems/Solutions 
Subject: 9pin connector not fully in contact with baseplate 

Thursday, October 31, 2019, 13:20: After inspecting the interior, the 9 pin bracket was found not making full contact with the  baseplate (pic attached).

After pushing it and re doing the bolts conctact works.

Attachment 1: 20191031_130003.jpg  335 kB  Uploaded Thursday, October 31, 2019, 14:27  | Hide | Hide all
20191031_130003.jpg
Attachment 2: 20191031_130028.jpg  412 kB  Uploaded Thursday, October 31, 2019, 14:28  | Show | Hide all
ELOG V2.9.2-2455