ELOG

Test-Stand

Not logged in

List

Message ID: 755 Entry time: Thursday, August 15, 2019, 16:33

Author:	Fernando Maldonado
Target/No.#:
Source:
Station:
Module:
Target Oven W.O#:
Heat Shield W.O#:
Status:	Problems/Solutions
Subject:	9-pin connection modification

Thursday, August 15, 2019, 16:17: Q FT undone to remove the connection to the 9-pin

The idea is to change the cables to have individual signals. This will allow 4 thermocouple readings.

NB: The FT is not vacuum tight as of now (gasket needs to be replaced and flange needs to be tight)