ELOG

Test-Stand

Not logged in

List

Message ID: 747 Entry time: Friday, July 19, 2019, 13:48

Author:	Fernando Maldonado
Target/No.#:
Source:
Station:
Module:
Target Oven W.O#:
Heat Shield W.O#:
Status:	Problems/Solutions
Subject:	RMP0A and FC6 gains signal redirection to another channel

After submitting a fault report (FR - ISAC Fault 12461) a Work Permit was issued (WP - C2019-07-19-1),

Controls tunnel the faulty signal to another ADC by removing signal no longer used at the Test Stand.

Test successful with a constant current power supply in the range 1 nA-40 nA.

TBD: does this work with beam?

ELOG V2.9.2-2455