ELOG

Test-Stand

Not logged in

List

Message ID: 677 Entry time: Friday, August 10, 2018, 10:56

Author:	Aaron Schmidt
Target/No.#:
Source:
Station:
Module:
Target Oven W.O#:
Heat Shield W.O#:
Status:	Problems/Solutions
Subject:	New PS installation and Cathode BIAS set

Friday, August 10, 2018, 10:25: Remove TBHT 500 PS and replace with TBHT 600 PS.

Friday, August 10, 2018, 10:50: Switch wiring in the high voltage cage from and Anode BIAS to Cathode BIAS setting.

Friday, August 10, 2018, 11:32: TBHT limit increased from 500A to 600A by Controls group.

Friday, August 10, 2018, 11:34: TBHT tested manually. Operation is satisfactory.