ELOG

Test-Stand

Not logged in

List

Message ID: 629 Entry time: Wednesday, February 07, 2018, 08:46

Author:	Aaron Schmidt
Target/No.#:
Source:
Station:
Module:
Target Oven W.O#:
Heat Shield W.O#:
Status:
Subject:	BIAS Power supply installation

Wednesday, February 07, 2018, 08:40: A 75 kV Glassman power supply was installed in the rack for use in further HV testing.

-The 75kV power supply is linked into the keyed interlock system. The key & switch labelled BIAS/EZL will unlock it.

-The PS is currently not connected to the epics controls and can only be adjusted manually.

-The old Glassman supply is disconnected and removed from the cage.

Attachment 1:

BIAS_PS_off_top_switch.jpg 1.207 MB Uploaded Thursday, February 08, 2018, 10:52 | Show | Hide all

Attachment 2:

BIAS_PS_70kV_rear_bottom.jpg 1.190 MB Uploaded Thursday, February 08, 2018, 10:52 | Show | Hide all

Attachment 3:

BIAS_PS_70kV_Front_bottom.jpg 953 kB Uploaded Thursday, February 08, 2018, 10:53 | Show | Hide all