ELOG

Test-Stand

Not logged in

List

Message ID: 554 Entry time: Monday, November 28, 2016, 15:39

Author:	Aaron Schmidt
Target/No.#:
Source:
Station:
Module:
Target Oven W.O#:
Heat Shield W.O#:
Status:	In progress
Subject:	Pump down empty chamber/Check Exhaust

Monday, November 28, 2016, 15:35: Begin roughing. Monitor exhaust mesh cover.

*Cover was found on the ground earlier today and re-attached*

Monday, November 28, 2016, 15:55: Exhaust mesh OK. Roughing continued.

Tuesday, November 29, 2016, 14:55: Test partially vented. @ around 550 T. Roughing restarted. Test delayed until tomorrow.

Wednesday, November 30, 2016, 07:23: Venting