ELOG

Test-Stand

Not logged in

List

Message ID: 175 Entry time: Friday, August 17, 2012, 08:30

Author:	Pierre Bricault
Target/No.#:
Source:
Station:
Module:
Target Oven W.O#:
Heat Shield W.O#:
Status:	In progress
Subject:	FEBIAD test with cathode biased

Yesterday Ray Dube has changed the configuration in order to run the FEBIAD with the cathode on negative bias.

There were a short between the gas line and the common. The box has been opened and the short removed.

This morning I am turning on the cathode heater to 290 A.