Annual MRO work on the T1 and T2 cooling packages is now complete.  The following tasks were performed:

• Water from both packages drained to the South TNF holding tank (samples taken)
• All Proteus paddle wheels, shafts, and o-rings replaced (5 each at T1 and T2)
• All Cuno filters changed
• Archived data for all sensor readbacks inspected.  Only faulty sensor was B1A:T1CS:FGDEM
• Both packages refilled and restarted; Operating smoothly; Inspected for leaks, none found; Demin flow at ~1.0gpm
• B1A:T1CS:FGDEM readback is fixed with new paddle wheel
• South TNF holding tank water released after approval from RPG
• Old filters added to plastic pail with other T1/T2 filters located directly north of the BL1A blocks boot-box area
• Active water from filter canisters dumped into the RH lab active sink