The following work was completed on both the T1 and T2 target alignment frames

• One of the short taper pins on the top of the frame was swapped for a longer version to simplify flask alignment to the frame (now one pin can be aligned at a time instead of both concurrently)
• Three permanently mounted cameras installed to view east/west alignment, north/south alignment, as well as hook, latch, and door position
• LED strip lights installed on the bottom of the frame for better illumination during alignment of target devices
• All video and power signals routed through a single connector (9-pin CPC) for ease of use
• Frame painted with blue Rustoleum metal paint
• Hole positions, alignment orientation, camera position, etc labeled on frame