The pail handling tool which is used to move 5 gallon pails around the target hall was inspected by A. Newsome. The main tool was checked, but not the spare as it is currently in a disassembled and unusable state. The tool appears to be in good, working condition. The following items were checked.

• Inspect structural integrity of long tube - check for bending, warpage, dents, cracks, rust/corrosion
• Inspect structural integrity of hook assembly - check for bending, warpage, dents, cracks, rust/corrosion
• Inspect fasteners - check all fasteners installed as per drawings, fasteners are tight
• Inspect crane interface assembly - check for damage and wear where the tool connects to the crane
• Check alignment - verify the tool connects to the crane and hangs vertically with no major misalignment (this step was not done - alignment is regularly checked during operations, and there was no concern as the tube was straight)

Note: these tools are being inspected monthly by D. Wang and F. Song.

Photos can be found in G:\remote handling\Facilities and Projects\ISAC\Pail Handling Tool\Inspections\June 2025

Note: the previous inspection mentioned that the load capacity and lifter tag for the tool were not present. These were installed on both the main and spare tool today.