September 5, 2024 -AT

• Plastic and clean target tray added to SHC 
• TM4 moved to SHC 
• TM4 containment box cover removed

September 6, 2024 - AT

• Ta#68(Spare) removed from TM4 onto clean tray 
  • top left mounting bolt fell under source tray in containment box - unretrievable
• Ta#68(Spare) moved out of SHC via toolport door 
  • SHC lift table was lower than tool port tunnel by 2". Target-on-Tray slipped back onto lift table when trying to drag it up to the tool port. Target bounced out of one locating pin, but stayed within boundaries of the tray 
  • Water also leaked out from the VCR fitting and on to the SHC lift table, and toolport. 
• Target-on-tray slid into a clean plastic bag, and then into a plastic box. 

 September 9, 2024 - AT

• Ta#68(Spare) taken out of plastic bag and water drained from waterlines
  • Target was rotated in every direction several times until no more water poured out from the VCR joints
• Ta#68(Spare) put back in box without the bag (to promote evaporation)