On Friday, June 22 the following work was carried out.

• Further inspection of the source tray.
• Testing of existing tray removal and installation tool...it works fine, there was just a specific method for proper coupling to the target module. There was no documentation for this tool, so it took a little bit of insight with the drawings and a little trial and error. A document should be written for this tool so its proper use is documented...I will do this.
• Blank-offs installed on heat shield water lines.
• New gaskets installed on window water lines.
• Containment box re-installed.

Pictures can be found at: http://documents.triumf.ca/docushare/dsweb/View/Collection-8639