|
Logbooks
Lab Maintenance
Evaporator_1
Evaporator_2
Laser cutter
Target Production
Test-Stand
RH-ISAC
RH-Cyclotron
RH-Meson Hall
RH-Beamlines
RH-ARIEL
|
| RH-ISAC |
Not logged in |
 |
|
|
 Friday, December 18, 2015, 11:42, Anders Mjos, Conditioning Station, Repair, , , Vacuum gauges not reading correctly
|
 Monday, December 21, 2015, 13:27, Anders Mjos, Conditioning Station, Repair, , , Vacuum gauges not reading correctly
|
|
|
Message ID: 1149
Entry time: Friday, December 18, 2015, 11:42
Reply to this: 1150
|
| Author: |
Anders Mjos |
| Category: |
Conditioning Station |
| Type: |
Repair |
| Module: |
|
| Target/Number: |
|
| Subject: |
Vacuum gauges not reading correctly |
|
|
It was found that the conversion from voltage to vacuum (Torr) in EPICS is not correct for the XGS-600 controllers in use at the TCS. EPICS did not correspond to local values displayed on the controller. An e-fault has been submitted. |