Attempted to remove RH parts between Q1, 2 and monitor vacuum box. Removed Q1 to monitor box parts, could not remove monitor to Q2 parts, pin drive and indium ring are stuck in place. Indium joint is severed however. Collar was removed.

East leg of pin drive was bent trying to remove the stuck indium ring, it is stuck to the monitor box.

Recommend to proceed with removal of magnet regarless of the current state of the indium ring.

Pails with RH parts marked 1384, 1385, 1386 and stored in north end of vault tunnel on grey shelf. RPG storage book updated to reflect this.