Laura Lambert wrote:

John Wong wrote: Tuesday, September 17, 2013, 11:14 Target boat contains 5 Nb discs.  3 discs are wraps with 0.001" thin of Nb foil (99.8% pure), and 2 are wraps with 0.001" Ta foil (see attachment#1) Chamber has been pumped down over night.  Pressure is currently at 9.8e-7 Torr.  Heating instructions: Samples will be heated up to 800C.  TGHT will be ramped up accordingly. (Two thermocouples are wielded on the target container.) Once at the desired temperature; the samples will be heat for 4 hours before cooling down.  Tuesday, September 17, 2013, 14:37 Target temperature has reached to 800C at around 13:00 (see attachment#2) TGHT @ 230A/3.07V (local 233A/3.25V).  IG @ 1.06e-6 Torr.  The heater will be ramped down at ~17:00 at 2A/min.  Tuesday, September 17, 2013, 17:36 Target temp: T1 = 805C, T2=797.6C IG @ 9.4e-7 Torr. Cooling down initiated.   Wednesday, September 18, 2013, 11:34 TGHT at 0A.  Temp at 22C.  IG @ 5.8e-7 Torr. Venting chamber.    Thursday, September 19, 2013, 11:41 Target boat contains batch#2 Nb samples (see attachment #1) Chamber has been pumped down over night.   IG @ 5.5e-07 Torr.  CG1B @ 0.033 T CG1A @ 0.127 T There is a leak in the backing line.  BV1 was bypassed in order to turn on the turbo pump. (Will investigate the leaks after the processes are done)   *See attached picture to view samples

Thursday, September 19, 2013, 17:01  

TGHT reached to 800A.  Temp at 795.9C for 4 hours.  Vac at 5.8e-7 Torr.

Cooling down initiated.  ramping rate at 2A/min.