Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL
  Evaporator_2  Not logged in ELOG logo
 List 
Message ID: 67     Entry time: Friday, April 19, 2013, 09:39
Author: Rick Maharaj 
Target Material: Empty 
Target Oven W.O#:  
Source:  
Status: Done 
Subject: thermocouple Feedthru 

 A thermocouple feedthru was installed via 9 pin sub-D connector. It runs from the the conflat cross on the top of the evaporator to the upper 9 pin connector of the target mounting plate.

ELOG V2.9.2-2455