Laura Lambert wrote:

Wednesday, June 14, 2017, 15:49 Pellets previously made by Marla and weighed. Pellets are placed inside a small graphite sample tube. Graphite sample tube loaded with pellets is loaded into a previously TaC coated boat. Boat is wrapped with 3x Ta heat shields. Loaded into evap2. Chamber currently pumping down.  Thursday, June 15, 2017, 11:24 HS water valves were opened this morning, no leaks detected. Tapped up manually to 50A, 0.44V Vacuum currently rising starting to settle. IGP1 = 1.51e-6 Torr. One vacuum stabilizes will initiate auto ramp at a rate of 1.0 A/min up to a final set point of 150 A. Final desired temperature of 1800C.

 Friday, June 16, 2017, 10:37

IGP1 = 7.91e-7 torr.

TGHT = 167 A, 2.3 V.

Tapped up manually to 350A yesterday, remained there overnight.

IGP1 = 4.55e-7 torr

TGHT=350 A, 5.6 V,

Changed slope to 0.98

Checked temperature readings with mikron to confirm slope

Mikron LS = 1260C, RS=1290C

OMEGA= 1295C

Initiating auto ramp at 1.0A/min to a final set point of 450A.

Final desired temperature of 1600C (no longer need to go to 1800C).

*note: graphite sample tube has graphite endcaps inserted