ELOG

Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL

Evaporator_2

Not logged in

List

Message ID: 315 Entry time: Thursday, August 18, 2016, 10:37

Author:	Anders Mjos
Target Material:
Target Oven W.O#:
Source:
Status:	Maintenance
Subject:	New cooling lines for Heat Shield

Dan made a set of new cooling lines for the Source Tray Heat Shield cooling yesterday. No joints on the lines. Use same VCR fitting 3/8 -> 1/4" as for the Heat Shield. The old lines had worn threads on the male VCR nut.