John Wong wrote:

Laura Lambert wrote:  Thursday, June 09, 2016, 15:39 First target using beta-SiC material! Target container contains 450 discs of SiC [4 x 5 packs + 430 single discs] Target packed length = 16cm.  Mass of 533 discs SiC(green)  = 53.8758g Container is wrapped with 3 heatshields; no end caps are inserted yet - coated spring inserted both sides to hold discs in place. Sintering temp = 1800C, TGHT will be set accordingly.  TBHT max at 230A.  Chamber is currently being pumped down.  Friday, June 10, 2016, 13:24 HS water valves opened, no leaks detected. Tapping up manually to 70A... Auto ramp will be set for TGHT = 0.2A/min to a final setpoint of 520A Auto-ramp for TBHT = 0.1A/min to a final setpoint of 230A.      Friday, June 10, 2016, 16:27 TGHT stepped up to 70A/0.55V.  TGHT at 50A/0.62V.  Pressure stabilized at 5.5e-5 Torr. Initiated auto ramping.  TGHT at 0.2A/min --> 520A.  TBHT at 0.1A/min --> 230A.

 Monday, June 13, 2016, 09:51

TGHT = 425A, 5.65V

TBHT = 225A, 3.7V

IGP1 = 8.7e-6 Torr.

Increasing ramping rate to 1.0A/min...

 Monday, June 13, 2016, 15:56

Tapped up manually from 520A to 1800C

Extrapolated data on graph to determine correct current required to reach desired max temperature.

Will remain at 1800C for ~48hrs

See attachements for excel sheet and screenshot of striptool.