ELOG

Logbooks Lab Maintenance Evaporator_1 Evaporator_2 Laser cutter Target Production Test-Stand RH-ISAC RH-Cyclotron RH-Meson Hall RH-Beamlines RH-ARIEL

Evaporator_2

Not logged in

List

Message ID: 120 Entry time: Friday, March 07, 2014, 10:34

Author:	Anders Mjos
Target Material:
Target Oven W.O#:
Source:
Status:	Problems resolved
Subject:	TGHT2 water flow signal

There was no signal going from the coils to the PLC. After manipulating the connection points on the coil a signal could again be established. Frequency is ~ 40Hz.