Fri May 22 15:03:55 2009, Damien Gallop, Routine, General, Temporary fix on IOS:TP7
|
Vacuum Group applied a temporary fix to the lower body seal on IOS:TP7, which we found last night to be leaking. Edi tells me that similar seals have failed before. It's an O-ring, not a metal seal. The fix now was to marinate the outside seam with silicon grease and wrap with Teflon tape. We'll see how that improves the backing line after a while.
Meanwhile, Vacuum Group is setting up to leack check the work. |
Thu May 14 11:07:33 2009, Hossein Rafighi, , , Test
|
Testing! |
Fri May 22 12:31:36 2009, Raymond Dubé, , , Test
|
Hello world |
Tue Sep 15 16:56:03 2009, Damien Gallop, , , Test scans for publication
|
Here are pix of the same scan: original, then greyscale, then cropped, using The GIMP. Not bad. |
Wed Sep 16 18:14:29 2009, Damien Gallop, , , Test scans for publication 2 19x
|
090916_1206ILTEMIT.txt
Graphics with "color" in the filename will look in print the same as "greyscale" files. |
Fri Oct 10 14:02:56 2014, Raymond Dube, Routine, General, Test with new Alga, ALPA 50W RF AMP
|
We did a test yesterday with the new Alga Microwave RF AMP, model # ALPA 50 Watt, serial # 130684 to be used for the MCIS. We used the RF Generator from MISTIC and set the frequency to 13.80 Ghz, note that the RF Generator was/is limited to 16DB maxiumum RF output.
The RF cable that we used was from the 200W RF AMP, it has a 20DB SMA attenuator at the Generator end, so we could only get about 25 Watts maximum output. |
Thu May 14 12:02:09 2009, Damien Gallop, Routine, General, Testing 2
|
My first OLIS elog entry. |
Tue Feb 22 18:52:53 2011, Keerthi Jayamanna, , , Ti+7 efficiency studies
|
2mm diameter Ti was installed to set the optics. Later 0.0005 in thick foil will be installed for real efficiency studies. |
Sat Feb 26 22:06:03 2011, Keerthi Jayamanna, , , Ti+7 status
|
90pA of Ti+7 is running smoothly. 22:05 Feb26th |
Fri Feb 25 17:27:11 2011, Keerthi Jayamanna, , , Titaniums efficiency test
|
Small peice of titanium wire is installed and running aroung 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
Fri Feb 25 17:27:11 2011, Keerthi Jayamanna, , , Titaniums efficiency test
|
Small piece of titanium foil 0.0005" thick is installed and running around 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
Sun Oct 11 17:09:52 2009, Keerthi, , , Vacuum with IOS:IV7
|
IOS:IG4 reads 1.25 e-7 Torr and IOS:IG1 reads 9.8e-8 Torr with IOS:IV7 is open
IOS:IG4 reads 8.35 e-8 Torr and IOS:IG1 reads 7.49e-8 Torr with IOS:IV7 is closed |
Tue Oct 14 08:31:53 2014, Brian Minato, Other, General, Water Flow Switch #3
|
This entry was incorrectly added to the OLIS logbook. it has been moved to the I3 logbook. |
|