| ID |
Date |
Author |
Type |
Category |
Subject |
|
7
|
Fri May 22 15:03:55 2009 |
Damien Gallop | Routine | General | Temporary fix on IOS:TP7 |
Vacuum Group applied a temporary fix to the lower body seal on IOS:TP7, which we found last night to be leaking. Edi tells me that similar seals have failed before. It's an O-ring, not a metal seal. The fix now was to marinate the outside seam with silicon grease and wrap with Teflon tape. We'll see how that improves the backing line after a while.
Meanwhile, Vacuum Group is setting up to leack check the work. |
|
1
|
Thu May 14 11:07:33 2009 |
Hossein Rafighi | | | Test |
Testing! |
|
6
|
Fri May 22 12:31:36 2009 |
Raymond Dubé | | | Test |
| Hello world |
|
137
|
Tue Sep 15 16:56:03 2009 |
Damien Gallop | | | Test scans for publication |
Here are pix of the same scan: original, then greyscale, then cropped, using The GIMP. Not bad. |
| Attachment 1: grab.E19994.png
|
 |
| Attachment 2: grab.U19879-greyscale.png
|
 |
| Attachment 3: grab.U19879-cropped.png
|
 |
|
144
|
Wed Sep 16 18:14:29 2009 |
Damien Gallop | | | Test scans for publication 2 |
090916_1206ILTEMIT.txt
Graphics with "color" in the filename will look in print the same as "greyscale" files. |
| Attachment 1: grab.E25328.png
|
 |
| Attachment 2: grab.E25328-color.png
|
 |
| Attachment 3: grab.E25328-greyscale.png
|
 |
| Attachment 4: grab.E25328-windowless.png
|
 |
| Attachment 5: grab.E25328-cropped.png
|
 |
| Attachment 6: grab.r25435.png
|
 |
| Attachment 7: grab.I25439.png
|
 |
| Attachment 8: grab.i25447.png
|
 |
| Attachment 9: grab.r25435-greyscale.png
|
 |
| Attachment 10: grab.r25435-windowless.png
|
 |
| Attachment 11: grab.r25435-cropped.png
|
 |
| Attachment 12: grab.i25447-color.png
|
 |
| Attachment 13: grab.i25447-greyscale.png
|
 |
| Attachment 14: grab.i25447-cropped.png
|
 |
| Attachment 15: grab.z25530.png
|
 |
| Attachment 16: grab.z25530-color.png
|
 |
| Attachment 17: grab.z25530-greyscale.png
|
 |
| Attachment 18: grab.z25530-windowless.png
|
 |
| Attachment 19: grab.z25530-cropped.png
|
 |
|
484
|
Fri Oct 10 14:02:56 2014 |
Raymond Dube | Routine | General | Test with new Alga, ALPA 50W RF AMP |
We did a test yesterday with the new Alga Microwave RF AMP, model # ALPA 50 Watt, serial # 130684 to be used for the MCIS. We used the RF Generator from MISTIC and set the frequency to 13.80 Ghz, note that the RF Generator was/is limited to 16DB maxiumum RF output.
The RF cable that we used was from the 200W RF AMP, it has a 20DB SMA attenuator at the Generator end, so we could only get about 25 Watts maximum output. |
| Attachment 1: ALPA-RF_AMP-50W.pdf
|
|
2
|
Thu May 14 12:02:09 2009 |
Damien Gallop | Routine | General | Testing 2 |
My first OLIS elog entry. |
|
385
|
Tue Feb 22 18:52:53 2011 |
Keerthi Jayamanna | | | Ti+7 efficiency studies |
2mm diameter Ti was installed to set the optics. Later 0.0005 in thick foil will be installed for real efficiency studies. |
|
390
|
Sat Feb 26 22:06:03 2011 |
Keerthi Jayamanna | | | Ti+7 status |
90pA of Ti+7 is running smoothly. 22:05 Feb26th |
|
389
|
Fri Feb 25 17:27:11 2011 |
Keerthi Jayamanna | | | Titaniums efficiency test |
Small peice of titanium wire is installed and running aroung 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
|
388
|
Fri Feb 25 17:27:11 2011 |
Keerthi Jayamanna | | | Titaniums efficiency test |
Small piece of titanium foil 0.0005" thick is installed and running around 100pA of Ti+7 at FC6.
OSAC are OPs taking data. |
|
158
|
Sun Oct 11 17:09:52 2009 |
Keerthi | | | Vacuum with IOS:IV7 |
IOS:IG4 reads 1.25 e-7 Torr and IOS:IG1 reads 9.8e-8 Torr with IOS:IV7 is open
IOS:IG4 reads 8.35 e-8 Torr and IOS:IG1 reads 7.49e-8 Torr with IOS:IV7 is closed |
|
485
|
Tue Oct 14 08:31:53 2014 |
Brian Minato | Other | General | Water Flow Switch #3 |
This entry was incorrectly added to the OLIS logbook. it has been moved to the I3 logbook. |