OLIS Logbook General
  General  Not logged in ELOG logo
Message ID: 500     Entry time: Wed Nov 12 13:32:47 2014
Author: Raymond Dube 
Type: Routine 
Category: General 
Subject: New in-line resistors for IOS:PE 

Today we replace the in-line resistors for the Plasma Electrode (PE) it was a 25 ohm 200W (2 x 50 Ohm 100W) with a 50 Ohm 200W (2 x 100 Ohm / 100W) also added the inductance coil.

This is R5 on drawing: ISK4583D rev. 10

This was done to reduce the power on R5

Note: We still need to make sure the the FAN is running to cool the resistors when the PE P/S is ON.

Attachment 1: ISK4583D-rev10.pdf  347 kB  Uploaded Thu Nov 13 09:19:07 2014
ELOG V2.9.2-2455