OLIS Logbook General
  General  Not logged in ELOG logo
Message ID: 482     Entry time: Wed Aug 13 15:09:42 2014
Author: Raymond Dubé 
Type: Routine 
Category: General 
Subject: OLIS Attenuators #2 fixed, #1 gone! 

Today Probe group (Scott K.) installed the OLIS Attenuator, they fixed the vacuum leak on Attenuator #2,  Marco M. asked them to remove Attenuator #1 because it is not needed and confusing for Ops;

 

Attenuator #1 was an experiment that Marco M. asked for, it was the same as Attenuator #2 but with 45 degrees offset, the results were not good and he decided to remove it.

ELOG V2.9.2-2455