OLIS Logbook General
  General  Not logged in ELOG logo
Message ID: 481     Entry time: Wed Aug 13 15:04:05 2014
Author: Raymond Dubé 
Type:  
Category:  
Subject: OLIS Bender Magnet PS (0-500 amps) 

Arthur and Derek had a look at the OLIS Bender Magnet P/S and found a problem with the Polarity Switch, it was set up upside down, they fixed that.

Note: We do not need a Polarity Switch for OLIS may be we should remove or bypass it, at the moment when the PS goes OFF we need to use the reverse Polarity to Bend the Beam the right way.

ELOG V2.9.2-2455