ELOG

General

Not logged in

List

Message ID: 179 Entry time: Wed Nov 4 09:46:07 2009

Author:	Damien Gallop
Type:
Category:
Subject:	MCIS online with 17O3+ on FC6 for development

Beam stayed up overnight nicely. Development today. RF scans in progress now.

Later... scanning done for the moment. Controls is looking at a PLC issue that has been on the books for a while. I have given the okay to turn on and off MCIS:IG1 at will.

Later aroun noon... We opened the cage and adjusted up the 17O2 flow slightly. Source is up and looking good. Optimize later.

Done for now. Some mass scans done. 1.2eµA at FC6.

Later... an initial emittance scan. Slits at 2.5mm.

Later... some tuning and another emittance scan. Slits at 5mm. 1.4eµA at FC6. EL deliberately low to balance skimmer spills. Save: 091104_1800.snapiosfc6

Let it cook for the night.

Attachment 1:

Picture_1.png 130 kB | Show | Show all

Attachment 2:

grab.Rz3236.png 28 kB Uploaded Wed Nov 4 16:58:42 2009 | Show | Show all

Attachment 3:

grab.kU3243.png 14 kB Uploaded Wed Nov 4 16:59:04 2009 | Show | Show all

Attachment 4:

grab.lP3249.png 40 kB Uploaded Wed Nov 4 16:59:50 2009 | Show | Show all

Attachment 5:

grab.vX3255.png 14 kB Uploaded Wed Nov 4 17:00:21 2009 | Show | Show all

Attachment 6:

grab.qk3694.png 27 kB Uploaded Wed Nov 4 18:17:07 2009 | Show | Show all

Attachment 7:

grab.iF3700.png 15 kB Uploaded Wed Nov 4 18:17:29 2009 | Show | Show all

Attachment 8:

grab.Ja3706.png 32 kB Uploaded Wed Nov 4 18:17:53 2009 | Show | Show all

Attachment 9:

grab.zF3715.png 14 kB Uploaded Wed Nov 4 18:18:13 2009 | Show | Show all

ELOG V2.9.2-2455